To Stop Playback - Sharp SD-SH111 Operation Manual

Caution:
Close the disc compartment when it is not in use. Otherwise, dust may accumulate
inside and cause malfunction to the unit.
The unit is slightly heated when used for a long time. It does not mean the unit is
damaged.
Be careful not to jam your fingers in the disc compartment cover.
Notes:
A safety feature automatically sets the unit to the power stand-by mode if you set
the volume level too high while playing certain types of discs. If this happens, lower
the volume level and restart playback.
Stop positions may be recorded on some discs. When you play such a disc, play-
back stops there.
During an operation, " " may appear indicating that the operation is disabled by
the disc.
[Front]
Press the DVD/CD
To resume playback from the same point, press the DVD/CD
Press the DVD/CD
1
[Back]
2
3
The operation may vary depending on the video CD. Refer to its manual for details.
To play without displaying the menu:
After pressing the DVD/CD
The P. B. C. function will be canceled, and the normal playback will
begin.
To interrupt playback
button.

To stop playback

button.
To play a video CD with P. B. C. (playback
control)
Press the DVD/CD button.
The menu screen appears.
Select the desired menu number using the direct
buttons (0 - 9).
Press the ENT button to start playback.
button, press the
02/11/20 SD-SH111(U)E3.fm
SD-SH111
ENGLISH
button again.
Display
button.
E-30
7