Speaker Level Setting; Test Tone - Sharp SD-SH111 Operation Manual

Speaker level setting

If sounds from the speakers are uneven, you can equalize them by adjusting the
speaker levels.
1
Press the SET UP AMP button.
2
Within 10 seconds, press the or
and press the ENT button.
3
Within 10 seconds, press the or
speaker.
4
Within 10 seconds, press the or
You can adjust the level at 1 dB intervals.
To adjust the levels of other speakers, repeat the operation from step 3.
You can complete the setting operation by pressing the RETURN
twice.
Speaker type
FL Front speaker (Left)
CT Center speaker
FR Front speaker (Right)
SR Surround speaker (Right)
SL Surround speaker (Left)
SW Subwoofer
Note:
Adjust the level of the subwoofer if the sound from it is distorted.
You can check the sound output from the speakers. (If the speaker levels are not
equalized, they can be adjusted, too.)
1
2
button to select "SP LEVEL",
button to select the desired
button to adjust the level.
3
If the levels are not equal:
While the test tone sounds, press the
button
You can select a speaker by pressing the
Note:
Adjustable range
If NO (OFF) is selected for a speaker in the speaker size setting, no test tone will be
- 10 dB - + 10 dB
heard from it.
- 10 dB - + 10 dB
- 10 dB - + 10 dB
- 10 dB - + 10 dB
1
- 10 dB - + 10 dB
- 10 dB - + 10 dB 2
3

Test tone

Press the SET UP AMP button.
Within 10 seconds, press the or button to select "TONE", and
press the ENT button.
The test tone will be heard from each speaker, in order, at about 2-second inter-
vals.
FL CT
SW SL
To finish checking, press the RETURN
or to adjust the level.
or button.
Changing crossover frequency
Press the SET UP AMP button.
Within 10 seconds, press the or button to select "X-FREQ", and
press the ENT button.
Within 10 seconds, press the or button to select frequency and
press the ENT button.
80 Hz 100 Hz
150 Hz 120 Hz
You can complete the setting operation by pressing the RETURN
twice.
02/11/20 SD-SH111(U)E6.fm
SD-SH111
ENGLISH
FR
SR
button twice.
button
E-52
7