Before Operating; Getting Started; Clock Setting; Stop/Clear - Sharp R-340A Operation Manual

BEFORE OPERATING

Getting Started

Step
Procedure
Plug the oven into a power point and
switch on the power.
1
Open the door.
2
The oven lamp comes on.
Close the oven door.
Press the STOP/CLEAR pad so that the
oven beeps.
3

Clock Setting

This is a 12 hour clock.
* To enter the present time of day 11:34 (AM or PM).
Step
Procedure
Press the TIMER/CLOCK pad.
1
Enter the correct time of day by pressing
the numbers in sequence.
2
Press the TIMER/CLOCK pad again.
3
If you attempt to enter an incorrect clock time (Ex. 13:45),
Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1:45).

Stop/Clear

Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.
Pad Order
Pad Order
1 1 3 4
will appear in the display.
E – 5
Display
Flashing eights
as above
Only the dots will remain.
Display
The dots (:) will flash on
and off.