Sequence Cooking - Sharp R-340A Operation Manual

Sequence Cooking

Your oven can be programmed for up to 3 automatic cooking sequences, switching from one variable
power setting to another automatically.
* Suppose you want to cook for 10 minutes on 50% followed by 5 minutes on 70% and then 3 minutes
on 100%.
Step
Enter desired cooking time.
1
Select desired power level by pressing the
POWER LEVEL pad (for 50% press three
2
times).
For second sequence, enter desired time
for cooking time.
3
Select desired power level by pressing
4
the POWER LEVEL pad (for 70% press
twice).
For third sequence, enter desired time for
cooking.
5
If power is not selected the oven will
operate at 100% power.
Press the INSTANT COOK/START pad.
6
NOTE: If you want to cook on 100% power at the final sequence, you can omit to select the power level.
Procedure Pad Order
1 O O O
x 3
5 O O
x 2
3 O O
E – 7
Display
COOK
The timer begins to count
down to zero. When it
reaches zero,
COOK
the second sequence will
appear and the timer will
begin counting down to
zero again. When it
reaches zero,
COOK
the third sequence will
appear and the timer will
begin counting down to
zero again.