Before Operating; Getting Started; Clock Setting; Stop/Clear - Sharp R-260L Operation Manual And Cooking Manual

BEFORE OPERATING

Getting Started

Step Procedure
Plug the oven into a power point.
Ensure the oven door is closed.
1
The display will begin flashing "88:88".
Press the STOP/CLEAR button so that the
oven beeps.
2
Only the dots will remain in the display.

Clock Setting

* To enter the present time of day 11:34 with a 12 hour
clock.
Step
Procedure
Press and hold the POWER LEVEL button
for 3 seconds.
1
"12H" will appear in the display.
Enter the hours by turning the TIME/WEIGHT
knob (11).
2
Press the POWER LEVEL button once.
3
Enter the minutes by turning the TIME/
WEIGHT knob (34).
4
x 1 and hold for
3 seconds.
x 1
6
To start the clock, press the POWER
LEVEL button once.
5
Your oven has a 12 hour and a 24 hour clock. To
select the 24 hour clock, press and hold the POW-
ER LEVEL button for 3 seconds, then press again.
"24H" will appear in the display.
The clock of the oven works based on the frequency
of power source. So it may gain or lose in some area
where the frequency varies. It is recommended that
you should adjust the time occasionally.

Stop/Clear

Press the STOP/CLEAR button once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
To Cancel a Programme
During Cooking
Press the STOP/CLEAR button twice.
x 1