Download Print this page

Advertisement

Quick Links

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
CPD-800.2
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
perform jerky or uncoordinated movements that may cause injury.
own safety do not begin any exercise program without proper instruction.
OWNER'S MANUAL
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.
TM
Trademark of United States Fitness Produots Council

Advertisement

loading
Need help?

Need help?

Do you have a question about the CPD-800.2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SteelFlex CPD-800.2

  • Page 1 5.Do not allow children or minors to play on or around this equipment. 6.If unsure of proper use of equipment, call your local distributor. 7.WARNING: Consult your physician before starting your exercise program. For your own safety do not begin any exercise program without proper instruction. CPD-800.2 OWNER'S MANUAL...
  • Page 2 CPD-800 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A1)ROUND ALLEN HEAD M8x40L PARTIAL THREAD QTY.2 (A2)HEX BOLT M8X35L PARTIAL THREAD QTY.4 (A3)HEX BOLT M8X60L PARTIAL THREAD QTY.4 (A4)HEX BOLT M10X60L PARTIAL THREAD QTY.4 (A5)M10X25L SOCKER FLAT HEAD SCREW QTY.2 inch 1" 2" 3" 4"...
  • Page 3: Hardware Illustration

    CPD-800 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (B1)NYLON LOCK NUT M8 QTY.2 (C5)M10(I.D.)FLAT WASHER Ø27X2T QTY.4 (B2)NYLON LOCK NUT M10 QTY.4 (B4)NYLON LOCK NUT 1/2" QTY.2 (C6)1/2" BOLT CAP(9212-024) QTY.4 (C1)3/8" ROUDN END CAP WASHER QTY.4 (C7)1/2"(I.D.)FLAT WASHER Ø25X3T QTY.2 (C2)M8 SPRING WASHER QTY.8 (C3)M8(I.D.)FLAT WASHER Ø18X1.5T QTY.4 (C8)M10(I.D.)FLAT WASHER Ø25X2T QTY.1 (C4)M8(I.D.)FLAT WASHER Ø24X1.5T QTY.8...
  • Page 4 CPD-800 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (C10)M20(I.D.)FLAT WASHER Ø30X2T QTY.4 inch 1" 2" 3" 5" 6" 4" CPD800.2-112009 Page...
  • Page 5 CPD-800 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION 50X10 END COVER (8130-131)---------------------------[2PCS] 1" CU WASHER(8520-008)---------------------------------[2PCS] 50 ROUND END CAP (9211-087)------------------------[2PCS] D4. 40X80 END CAP(9211-113)-----------------------------------[3PCS] 60X42H DECK BUFFER (9214-037)----------------------[2PCS] 0X80 ROUND END COVER (9261-070)-----------------[2PCS] 0X80 FOOT CAP (9261-071)---------------------------------[1PCS] D9. 40X80 FOOT CAP (9261-072)---------------------------------[1PCS] D10. 95X140L RUBBER PAD(9630-003)-------------------------[2PCS] D11.
  • Page 6 CPD-800 ASSEMBLY INSTRUCTIONS PARTS ILLUSTRATION SHEET B2[1PCS] A2[1PCS] Q[1PCS] C2[1PCS] P[1PCS] O[1PCS] F[1PCS] D1[2PCS] 8343-211 8220-162 90X5TX87.5 Ø20X260L H[1PCS] G[1PCS] I[2PCS] J[1PCS] 5584-K008 5584-K007 8830-018 8386-101 40X80X2TX600L 40X80X2TX600L K[1PCS] L[1PCS] M[2PCS] 9111-065 9121-064 9131-021 CPD800.2-112009 Page...
  • Page 7 CPD-800 ASSEMBLY INSTRUCTIONS Above shows STEP 1 assembled and completed CPD800.2-112009 Page...
  • Page 8 CPD-800 ASSEMBLY INSTRUCTIONS Above shows STEP 2 assembled and completed CPD800.2-112009 Page...
  • Page 9 CPD-800 ASSEMBLY INSTRUCTIONS Above shows STEP 3 assembled and completed M8X20L HEX BOLT M10X20L HEX BOLT STEEL BUSHING(8110-087) M10 WASHER Ø27 M8 WASHER Ø24 X2PCS M8X20L HEX BOLT X2PCS M10 WASHER Ø27 M10 HEX BOLT M8 WASHER Ø18 ROUND ALLEN HEAD M8X40L M8 NYLON LOCK NUT M8 WASHER Ø18 * : Tighten the nylon locknut until it fixed,...
  • Page 10 CPD-800 ASSEMBLY INSTRUCTIONS Above shows STEP 4 assembled and completed CPD800.2-112009 Page...
  • Page 11 ASSEMBLY INSTRUCTIONS Oil Complement M10X25L SOCKER FLAT HEAD SCREW Ø50x10 end cover(8130-131) Ø30X2TXØ20.2 washer All shafts and pivots should be smeared grease before assembling. The maintenance step should be repeated if shaft have abnormal noise. Page...

This manual is also suitable for:

Cpd-800