Download Print this page

Advertisement

Quick Links

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
perform jerky or uncoordinated movements that may cause injury.
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
own safety do not begin any exercise program without proper instruction.
CL2HL
OWNER'S MANUAL
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.
TM
Trademark of United States Fitness Produots Council

Advertisement

loading
Need help?

Need help?

Do you have a question about the CLUB LINE CL2HL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SteelFlex CLUB LINE CL2HL

  • Page 1 The Surgeon General has determined that lack of physical activity is detrimental to your health. Trademark of United States Fitness Produots Council THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: 1.Inspect equipment before each workout.
  • Page 2: Hardware Illustration

    CL2HL ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A1)HEX BOLT M12X25L PARTIAL THREAD QTY.4 (A2)HEX BOLT M12X75L PARTIAL THREAD QTY.2 (A3)ROUND ALLEN HEAD M10X16L FULL THREAD QTY.2 (A4)ROUND ALLEN HEAD M8X10L FULL THREAD QTY.1 (A5)ROUND ALLEN HEAD M8X25L FULL THREAD QTY.4 (A6)HEX BOLT M10X45L PARTIAL THREAD QTY.2 inch 2"...
  • Page 3 CL2HL ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A7)HEX BOLT M10X50L PARTIAL THREAD QTY.3 (A8)HEX BOLT M10X115L PARTIAL THREAD QTY.1 (A9)HEX BOLT M12X60L PARTIAL THREAD QTY.1 inch 2" 1" 3" 4" 5" 6" CL2HL-062017 Page...
  • Page 4 CL2HL ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (B1)NYLON LOCK NUT M12 QTY.3 (C3)M10(I.D.)FLAT WASHER Ø20 QTY.2 (C4)M8 SPRING WASHER QTY.5 (B2) 1/2" NUT-13UNC QTY.1 (C5)M8(I.D.)FLAT WASHER Ø24 QTY.4 (B3)NYLON LOCK NUT M10 QTY.6 (C6)1/2" SPRING WASHER QTY.1 (C1)M12(I.D.)FLAT WASHER Ø25 QTY.5 (C7)M10(I.D.)FLAT WASHER Ø27 QTY.10 (C2)M12(I.D.)FLAT WASHER Ø34 QTY.7 (C8)M10(I.D.)FLAT WASHER Ø19 QTY.2 inch...
  • Page 5 CL2HL ASSEMBLY INSTRUCTIONS FRAME HARDWARE ILLUSTRATION FOR CL2DA (AA1)ROUND ALLEN HEAD M6X16L FULL THREAD QTY.4 (AA2)HEX BOLT M12X95L PARTIAL THREAD QTY.2 (AA3)ROUND ALLEN HEAD 3/8"X2"L PARTIAL THREAD QTY.1 (AA4)HEX BOLT M12X90L PARTIAL THREAD QTY.2 (AA5)ROUND ALLEN HEAD M4X12L FULL THREAD QTY.2 inch 2"...
  • Page 6 ASSEMBLY INSTRUCTIONS CL2HL FRAME HARDWARE ILLUSTRATION FOR CL2DA (AA6)ELASTIC BELT F920003 QTY.1 (AA7)10LB PIN (8250-128) QTY.1 (AA8)HEX BOLT M10X45L PARTIAL THREAD QTY.2 inch 2" 1" 3" 4" 5" 6" CL2HL-092018 Page...
  • Page 7 CL2HL ASSEMBLY INSTRUCTIONS FRAME HARDWARE ILLUSTRATION FOR CL2DA (CC1)M6(I.D.)FLAT WASHER Ø19 QTY.4 (BB1)NYLON LOCK NUT M12 QTY.4 (BB2) 1/2" NUT-13UNC QTY.1 (CC2)M12(I.D.)FLAT WASHER Ø34 QTY.8 (BB3)NYLON LOCK NUT M4 QTY.2 (CC3)3/8" SPRING WASHER QTY.1 (BB4)NYLON LOCK NUT M10 QTY.2 (CC4)1/2" SPRING WASHER QTY.1 (CC5)M4(I.D.)FLAT WASHER Ø12 QTY.4 (CC6)M10(I.D.)FLAT WASHER Ø27 QTY.4 inch...
  • Page 8 CL2HL ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION D1.Ø5/8"X22.5L STEEL BUSHING(8110-011)--------------------- [2PCS] [2PCS] D2.Ø36XØ26.5X15L SHAFT COLLAR(8130-024)---------------- D3.Ø1"X70L STEEL BUSHING(8220-244)-------------------------- [1PCS] D4.Ø10XØ20X19.5L STEEL BUSHING(8530-015)--------------- [2PCS]  [2PCS] 8 SPRING SNAP LINK(8810-001)------------------------------  [1PCS] 45 END CAP(9211-004)------------------------------------------ D7.45.5X60L NYLON BUSHING(9211-047)------------------------ [2PCS]  24.7X15L END CAP(9211-077)--------------------------------- [2PCS] [6PCS] D9.PLATE CAP(9211-173)----------------------------------------------...
  • Page 9 CL2HL ASSEMBLY INSTRUCTIONS FRAME HARDWARE ILLUSTRATION FOR CL2DA DD1.3/4" Shaft Collar(9211-046)--------------------------------------- [2PCS] DD2.2"x2" Rubber Cane Cap (9214-002)---------------------------- [1PCS] DD3.Ø2-1/2" RUBBER PAD(9310-010)------------------------------ [2PCS]  DD4. 26X13.5tX161 RUBBER PAD(9310-115)------------------- [2PCS] DD5.BOTTLE BRACKET(8388-025)---------------------------------- [1PCS] DD6.BOTTLE RACK(9260-320)---------------------------------------- [1PCS] DD7.BOTTLE(9260-123)------------------------------------------------- [1PCS] DD8.Ø110X22L PULLEY(9213-002B)-------------------------------- [2PCS] CL2HL-062017 Page...
  • Page 10 CL2HL ASSEMBLY INSTRUCTIONS PARTS ILLUSTRATION SHEET A[1SET] B[1SET] C[1SET] D[1SET] E[1SET] F[1SET] G[1SET] H[1PCS] 5325J014-26 CL2HL-062017 Page...
  • Page 11 ASSEMBLY INSTRUCTIONS CL2HL PARTS ILLUSTRATION SHEET K[1PCS] I[1PCS] J[1PCS] 9121-106 280251 8313-144 L[2PCS] M[1PCS] N[1PCS] 9161-077 9420-128 20LB500E P[1PCS] O[1PCS] 8331-017 20LB1200J Q[1PCS] 9211-205 CL2HL-072018 Page...
  • Page 12 CL2HL ASSEMBLY INSTRUCTIONS FRAME PARTS ILLUSTRATION SHEET FOR CL2DA AA[1SET] AB[1SET] AC[1SET] 6610-040 6610-041 6610-039 AD[2SET] AE[2SET] AF[1SET] 6670-005 8321-066 8210-042 Ø3/4"X596L AG[1SET] AH[2PCS] AI[1SET] 8400-006 8280-013 8380-084 Ø3/4"X1920L AJ[1SET] 8380-085 CL2HL-062017 Page...
  • Page 13 ASSEMBLY INSTRUCTIONS CL2HL Above shows STEP 1 assembled and completed AA1X4 CC1X4 AEX2 BB1X2 CC2X2 CC2X2 AA2X2 DD4X2 M10X16L CONE SCREW X2 CL2HL-062017 Page...
  • Page 14 ASSEMBLY INSTRUCTIONS CL2HL Above shows STEP 2 assembled and completed AHX2 STEP 1 CL2HL-062017 Page...
  • Page 15 ASSEMBLY INSTRUCTIONS CL2HL *: 5/16"X3/8"L SCREW X10 NEED TO LOOSEN BOTH ALLEN HEAD BOLT IN ORDEA TO REMOVE SHAFT CC2X2 AA4X2 A2X2 C1X2 DD1X2 D10X2 Above shows STEP 3 assembled and completed BB1X2 CC2X2 A1X2 C2X2 STEP 2 CL2HL-062017 Page...
  • Page 16 ASSEMBLY INSTRUCTIONS CL2HL Above shows STEP 4 assembled and completed A3X2 C3X2 A1X2 C2X2 STEP 3 CL2HL-062017 Page...
  • Page 17 ASSEMBLY INSTRUCTIONS CL2HL Above shows STEP 5 assembled and completed LOOSEH SCREWS Figure 1 STEP 4 222.5 DETIAL VIEW CL2HL-122017 Page...
  • Page 18 ASSEMBLY INSTRUCTIONS CL2HL *: 5/16"X5/16"L SCREW X2 NEED TO LOOSEN BOTH ALLEN HEAD BOLT IN ORDEA TO REMOVE SHAFT Above shows STEP 6 assembled and completed STEP 5 Tighten all Screws C5X2 C4X2 A5X2 C5X2 C4X2 A5X2 CL2HL-122017 Page...
  • Page 19 ASSEMBLY INSTRUCTIONS CL2HL Cable Constitute illustration Figure 2 CL2HL-062017 12.1 Page...
  • Page 20 ASSEMBLY INSTRUCTIONS CL2HL Above shows STEP 7 assembled and completed C1X2 C8X2 D4X2 Figure 2 STEP 6 CL2HL-062017 Page...
  • Page 21 ASSEMBLY INSTRUCTIONS CL2HL Cable Constitute illustration Figure 3 CL2HL-062017 13.1 Page...
  • Page 22 ASSEMBLY INSTRUCTIONS CL2HL Figure 4 Above shows STEP 8 assembled and completed BB4 CC6 D9 CC6 A7 STEP 7 CL2HL-062017 Page...
  • Page 23 ASSEMBLY INSTRUCTIONS CL2HL Above shows STEP 9 assembled and completed AA5X2 CC5X2 CC5X2 BB3X2 CL2HL-082017 Page...
  • Page 24 ASSEMBLY INSTRUCTIONS CL2HL M10X15L ROUND INNER HEAD X2 M10X15L ROUND BOLT X2 M10 WASHER Ø19 X2 Above shows STEP 10 STEP 9 assembled and completed M6 WASHER Ø13 X4 M6X12L ROUND BOLT X4 SPET 8 M10 WASHER Ø19 X2 M10X15L ROUND BOLT X2 CL2HL-072018 Page...