Download Print this page
Hide thumbs Also See for CEO-200:

Advertisement

Quick Links

CEO-200.3
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
perform jerky or uncoordinated movements that may cause injury.
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
own safety do not begin any exercise program without proper instruction.
OWNER'S MANUAL
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.
TM
Trademark of United States Fitness Produots Council

Advertisement

loading
Need help?

Need help?

Do you have a question about the CEO-200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SteelFlex CEO-200

  • Page 1 5.Do not allow children or minors to play on or around this equipment. 6.If unsure of proper use of equipment, call your local distributor. 7.WARNING: Consult your physician before starting your exercise program. For your own safety do not begin any exercise program without proper instruction. CEO-200.3 OWNER'S MANUAL...
  • Page 2 CEO-200 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A1)ROUND INNER HEX SCREW M8X45L PARTIAL QTY.2 (A2)M8X30L SOCKER FLAT SCREW QTY.4 (A3)HEX BOLT M12X130L PARTIAL QTY.4 (A4)BOLT CAP(9212-024) QTY.8 (A5)M10X25L SOCKER FLAT SCREW QTY.1 CEO200.3-092012 Page...
  • Page 3 CEO-200 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (B1) M8 NYLON LOCK NUT QTY.2 (C3)1/2" ROUND END CAP WASHER QTY.8 (B2)M10 NYLON LOCK NUT QTY.2 (C4)M10 SPRING WASHER QTY.2 (C5)M20(I.D.)FLAT WASHER Ø30 QTY.2 (B2)M12 NYLON LOCK NUT QTY.4 (C1)M8(I.D.)FLAT WASHER Ø24 QTY.4 (C2)M10(I.D.)FLAT WASHER Ø27 QTY.2 CEO200.3-092012...
  • Page 4 CEO-200 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION ------------------------------------------[1PCS] (D1)Ø50X10 END COVER(8130-131) -----------------------------------------------------[1PCS] (D2)CU WASHER(8520-008) ------------------------------------------[2PCS] (D3)50X75 FLAT END CAP(9211-012) -----------------------------------------[2PCS] (D4)50X100 FLAT END CAP(9211-014) -----------------------------------------------------[2PCS] (D5)Ø64 PULLEY(9213-023) -------------------------------------[4PCS] (D6)Ø60X42H DECK BUFFER(9214-037) ------------------------[2PCS] (D7)Ø16.1XØ8X22.5L STEEL BUSHING(8110-150) CEO200.3-062015 Page...
  • Page 5 CEO-200 ASSEMBLY INSTRUCTIONS PARTS ILLUSTRATION SHEET A[1SET] B2[1SET] C1[1SET] D[1PCS] E1[2PCS] F[2PCS] 9710-020 8830-018 8312-091 CEO200.3-062015 Page...
  • Page 6 CEO-200 ASSEMBLY INSTRUCTIONS Above shows STEP1 assembled and completed C3X2 B2X2 A4X4 A4X2 A3X4 C3X4 C3X2 B2X2 A4X2 CEO200.3-092012 Page...
  • Page 7 CEO-200 ASSEMBLY INSTRUCTIONS Above shows STEP2 assembled and completed A2X4 CEO200.3-092012 Page...
  • Page 8 CEO-200 ASSEMBLY INSTRUCTIONS Above shows STEP3 assembled and completed M8X35L ROUND INNER HEX SCREW X2 M8 SPRING WASHER X2 M8 WASHER Ø24 X2 CEO200.3-062015 Page...

This manual is also suitable for:

Ceo-200.3