Download Print this page
SteelFlex CLP-600 Owner's Manual
Hide thumbs Also See for CLP-600:

Advertisement

Quick Links

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
perform jerky or uncoordinated movements that may cause injury.
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
own safety do not begin any exercise program without proper instruction.
CLP-600
OWNER'S MANUAL
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.
TM
Trademark of United States Fitness Produots Council

Advertisement

loading
Need help?

Need help?

Do you have a question about the CLP-600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SteelFlex CLP-600

  • Page 1 5.Do not allow children or minors to play on or around this equipment. 6.If unsure of proper use of equipment, call your local distributor. 7.WARNING: Consult your physician before starting your exercise program. For your own safety do not begin any exercise program without proper instruction. CLP-600 OWNER'S MANUAL...
  • Page 2 CLP-600 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A1)HEX BOLT M8X25L PARTIAL QTY.4 (A2)ROUND INNER HEX SCREW M8X40L PARTIAL QTY.4 (A3)HEX BOLT M8X60L PARTIAL QTY.2 (A4)HEX BOLT M10X60L PARTIAL QTY.4 (A5)HEX BOLT M10X100L PARTIAL QTY.2 CLP600-032008 Page...
  • Page 3 CLP-600 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A6)HEX BOLT M12X80L PARTIAL QTY.2 (A7)BOLT CAP(9212-024) QTY.8 (A8)M10X25L SOCKER FLAT SCREW QTY.8 CLP600-032008 Page...
  • Page 4 CLP-600 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (C3)M10(I.D.)FLAT WASHER Ø20 QTY.4 (B1) M8 NYLON LOCK NUT QTY.4 (C4)M10(I.D.)FLAT WASHER Ø27 QTY.4 (B2)M10 NYLON LOCK NUT QTY.6 (C5)3/8" ROUND END CAP WASHER QTY.4 (B2)M12 NYLON LOCK NUT QTY.2 (C1)M8(I.D.)FLAT WASHER Ø18 QTY.8 (C6)1/2" ROUND END CAP WASHER QTY.4 (C7)M8 SPRING WASHER QTY.6...
  • Page 5 CLP-600 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION -------------------------------------------[8PCS] (D1)Ø50X10 END COVER(8130-131) -------------------------------------[2PCS] (D2)60X50 PLASTIC BUSHING(9211-033) -------------------------------[4PCS] (D3)50X50X1.8t ROUND END CAP(9211-087) -------------------------------------------------[1PCS] (D4)40X80 END CAP(9211-113) --------------------------------------------------[4PCS] (D5)30X60 END CAP(9211-139) -------------------------------------[2PCS] (D6)Ø60X42H DECK BUFFER(9214-037) ---------------------------------[2PCS] (D7)40X80 ROUND END COVER(9261-070) ------------------------------------------------[1PCS] (D8)40X80 FOOT CAP(9261-071) ------------------------------------------------[1PCS]...
  • Page 6 CLP-600 ASSEMBLY INSTRUCTIONS PARTS ILLUSTRATION SHEET A[1SET] B[1SET] C[1SET] D[1SET] E[1SET] F[1SET] G[1SET] H[1SET] 6640-007 6640-008 I[1PCS] J[1PCS] K[2SET] L[2SET] 5584-K007 5584-K008 8220-148 8220-149 40X80X2tX600L 40X80X2tX600L Ø25.4X73.5L Ø25.4X89L M[2PCS] N[2PCS] O[1PCS] P[1PCS] 8386-101 8830-016 9111064 9121066 CLP600-032008 Page...
  • Page 7 CLP-600 ASSEMBLY INSTRUCTIONS Above shows STEP1 assembled and completed A7X2 B2X2 C5X2 C4X2 A4X2 A7X2 B2X2 C4X2 C5X2 A4X2 CLP600-032008 Page...
  • Page 8 CLP-600 ASSEMBLY INSTRUCTIONS Above shows STEP2 assembled and completed B2X2 C3X2 C1 A2 C3X2 A5X2 CLP600-032008 Page...
  • Page 9 CLP-600 ASSEMBLY INSTRUCTIONS Above shows STEP3 assembled and completed A7X2 A6X2 C6X2 C6X2 B2X2 A7X2 CLP600-032008 Page...
  • Page 10 CLP-600 ASSEMBLY INSTRUCTIONS Above shows STEP4 assembled and completed A1X4 C7X4 C2X4 M8 SPRING WASHER M8X10L ROUND INNER HEAD C2X2 C7X2 A3X2 CLP600-032008 Page...