Download Print this page

Advertisement

Quick Links

CCP-1300
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
perform jerky or uncoordinated movements that may cause injury.
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
own safety do not begin any exercise program without proper instruction.
OWNER'S MANUAL
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.
TM
Trademark of United States Fitness Produots Council

Advertisement

loading
Need help?

Need help?

Do you have a question about the CCP-1300 and is the answer not in the manual?

Questions and answers

Summary of Contents for SteelFlex CCP-1300

  • Page 1 5.Do not allow children or minors to play on or around this equipment. 6.If unsure of proper use of equipment, call your local distributor. 7.WARNING: Consult your physician before starting your exercise program. For your own safety do not begin any exercise program without proper instruction. CCP-1300 OWNER'S MANUAL...
  • Page 2 CCP-1300 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A1)ROUND INNER HEX SCREW M8X40L PARTIAL QTY.2 (A2)HEX BOLT M8X25 PARTIAL QTY.4 (A3)HEX BOLT M10X60L PARTIAL QTY.4 (A4)BOLT CAP(9212-024) QTY.4 (A5)ROUND INNER HEX SCREW M5X4L QTY.4 CCP1300-062017 Page...
  • Page 3 CCP-1300 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (C4)3/8" ROUND END CAP WASHER QTY.4 (B1) M8 NYLON LOCK NUT QTY.2 (B2)M10 NYLON LOCK NUT QTY.4 (C5)M8 SPRING WASHER QTY.4 (C1)M8(I.D.)FLAT WASHER Ø18 QTY.4 (C6)M20 WASHER Ø30 QTY.2 (C2)M8(I.D.)FLAT WASHER Ø24 QTY.4 (C3)M10(I.D.)FLAT WASHER Ø27 QTY.4...
  • Page 4 CCP1300 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (D1)Ø16.1XØ8X22.5L STEEL BUSHING(8110-150) -------------------------[2PCS] (D2)Ø50X10 END COVER(8130-131) --------------------------------------------[2PCS] (D3)Ø35X26X19L STEEL BUSHING(8890-079) ------------------------------[2PCS] --------------------------------------------[4PCS] (D4) 3" NYLON WASHER(9214-008) (D5)Ø60X42H DECK BUFFER(9214-037) -------------------------------------[2PCS] -----------------------------------[2PCS] (D6)40X80 ROUND END COVER(9261-070) (D7)40X80 FOOT CAP(9261-071) ------------------------------------------------[1PCS] (D8)40X80 FOOT CAP(9261-072) ------------------------------------------------[1PCS] CCP1300-062017 Page...
  • Page 5 CCP-1300 ASSEMBLY INSTRUCTIONS PARTS ILLUSTRATION SHEET C[1SET] A[1SET] B[1SET] F[1SET] E[1PCS] D[1PCS] 8220-148 5584-K008 5584-K007 Ø20X74L 40X80X2tX600L 40X80X2tX600L I[2PCS] G[2PCS] H[1SET] 9161-077 8386-101 8830-029 J[1SET] 9121-115 CCP1300-092017 Page...
  • Page 6 CCP-1300 ASSEMBLY INSTRUCTIONS Above shows STEP1 assembled and completed A4X2 B2X2 HEX BOLT M12X25L X2 C4X2 M10-Ø25 WASHER X2 C3X2 A3X2 A4X2 B2X2 C4X2 C3X2 A3X2 CCP1300-092017 Page...
  • Page 7 CCP-1300 ASSEMBLY INSTRUCTIONS Above shows STEP2 assembled and completed C2X4 M10X25L CONE SCREW X2 C5X4 D2X2 A2X4 CCP1300-092017 Page...