Download Print this page
SteelFlex CPD-800 Owner's Manual
Hide thumbs Also See for CPD-800:

Advertisement

Quick Links

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
CPD-800.6
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
perform jerky or uncoordinated movements that may cause injury.
own safety do not begin any exercise program without proper instruction.
OWNER'S MANUAL
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.
TM
Trademark of United States Fitness Produots Council

Advertisement

loading
Need help?

Need help?

Do you have a question about the CPD-800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SteelFlex CPD-800

  • Page 1 5.Do not allow children or minors to play on or around this equipment. 6.If unsure of proper use of equipment, call your local distributor. 7.WARNING: Consult your physician before starting your exercise program. For your own safety do not begin any exercise program without proper instruction. CPD-800.6 OWNER'S MANUAL...
  • Page 2 CPD-800 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A1)ROUND ALLEN HEAD M8x40L PARTIAL THREAD QTY.2 (A2)HEX BOLT M8X35L PARTIAL THREAD QTY.4 (A3)HEX BOLT M8X60L PARTIAL THREAD QTY.4 (A4)HEX BOLT M10X60L PARTIAL THREAD QTY.4 (A5)M10X25L SOCKER FLAT HEAD SCREW QTY.2 inch 1" 2" 3"...
  • Page 3 CPD-800 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (B1)NYLON LOCK NUT M8 QTY.2 (C5)M10(I.D.)FLAT WASHER Ø27X2T QTY.4 (B2)NYLON LOCK NUT M10 QTY.4 (B4)NYLON LOCK NUT 1/2" QTY.2 (C6)1/2" BOLT CAP(9212-024) QTY.4 (C1)3/8" ROUDN END CAP WASHER QTY.4 (C7)1/2"(I.D.)FLAT WASHER Ø25X3T QTY.2 (C2)M8 SPRING WASHER QTY.8 (C3)M8(I.D.)FLAT WASHER Ø18X1.5T QTY.4...
  • Page 4 CPD-800 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (C10)M20(I.D.)FLAT WASHER Ø30X2T QTY.4 inch 1" 2" 3" 5" 6" 4" CPD800.6-022023 Page...
  • Page 5 CPD-800 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION  50X10 END COVER (8130-131)---------------------------[2PCS]  50 ROUND END CAP (9211-087)------------------------[2PCS] D4. 40X80 END CAP(9211-113)-----------------------------------[3PCS]  60X42H DECK BUFFER (9214-037)----------------------[2PCS]  0X80 ROUND END COVER (9261-070)-----------------[2PCS]  0X80 FOOT CAP (9261-071)---------------------------------[1PCS] D9. 40X80 FOOT CAP (9261-072)---------------------------------[1PCS] D10.
  • Page 6 CPD-800 ASSEMBLY INSTRUCTIONS PARTS ILLUSTRATION SHEET B2[1PCS] A3[1PCS] Q[1PCS] C2[1PCS] P[1PCS] O[1PCS] F[1PCS] D1[2PCS] 8343-211 8220-162 90X5TX87.5 Ø20X260L H[1PCS] G[1PCS] J[1PCS] I[2PCS] 5584-K008 5584-K007 8830-018 8386-101 40X80X2TX600L 40X80X2TX600L K[1PCS] L[1PCS] M[2PCS] 9111-065 9121-064 9131-021 CPD800.6-022023 Page...
  • Page 7 CPD-800 ASSEMBLY INSTRUCTIONS Above shows STEP 1 assembled and completed CPD800.6-022023 Page...
  • Page 8 CPD-800 ASSEMBLY INSTRUCTIONS Above shows STEP 2 assembled and completed CPD800.6-022023 Page...
  • Page 9 CPD-800 ASSEMBLY INSTRUCTIONS Above shows STEP 3 assembled and completed M8 WASHER Ø18 M8 NYLON LOCK NUT M10X20L HEX BOLT M10 SPRING WASHER M10 WASHER Ø27 STEEL BUSHING(8110-182) M8 WASHER Ø24 X2PCS M8X20L HEX BOLT X2PCS ROUND ALLEN HEAD M8X40L M8 WASHER Ø18...
  • Page 10 CPD-800 ASSEMBLY INSTRUCTIONS Warning The model has been adjusted before leaving the factory ,In case of abnormal sound or unsmoothness, please follow the steps below to deal with Step 1, first loosen the A side and B side screw group...
  • Page 11 CPD-800 ASSEMBLY INSTRUCTIONS Above shows STEP 4 assembled and completed CPD800.6-022023 Page...

This manual is also suitable for:

Cpd-800.6