Download Print this page

Advertisement

Quick Links

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
perform jerky or uncoordinated movements that may cause injury.
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
own safety do not begin any exercise program without proper instruction.
CBP-300
OWNER'S MANUAL
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.
TM
Trademark of United States Fitness Produots Council

Advertisement

loading
Need help?

Need help?

Do you have a question about the CBP-300 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SteelFlex CBP-300

  • Page 1 5.Do not allow children or minors to play on or around this equipment. 6.If unsure of proper use of equipment, call your local distributor. 7.WARNING: Consult your physician before starting your exercise program. For your own safety do not begin any exercise program without proper instruction. CBP-300 OWNER'S MANUAL...
  • Page 2 CBP-300 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A1)ROUND ALLEN HEAD M8x40L PARTIAL THREAD QTY.2 (A2)HEX BOLT M8X60L PARTIAL THREAD QTY.4 (A3)HEX BOLT M10X60L PARTIAL THREAD QTY.4 (A4)SOCKER FLAT HEAD SCREW M10X25L PARTIAL THREAD QTY.2 inch 1" 2" 3" 5" 6" 4" CBP300-032008...
  • Page 3 CBP-300 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (B1)NYLON LOCK NUT M8 QTY.2 (C3)M8(I.D.)FLAT WASHER Ø18X1.5T QTY.4 (C4)M8(I.D.)FLAT WASHER Ø24X1.5T QTY.4 (B2)NYLON LOCK NUT M10 QTY.4 (C5)M10(I.D.)FLAT WASHER Ø27X2T QTY.4 (C1) 3/8" ROUDN END CAP WASHER QTY.4 (C2)M8 SPRING WASHER QTY.4 (C6)1/2" BOLT CAP(9212-024) QTY.4 inch 1"...
  • Page 4 CBP-300 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION 50X10 END COVER (8130-131)---------------------------[2PCS] D2. 40X80 END CAP(9211-113)-----------------------------------[2PCS] 60X42H DECK BUFFER (9214-037)----------------------[2PCS] 0X70 ROUND END COVER (9261-061)------------------[2PCS] 0X80 ROUND END COVER (9261-070)-----------------[2PCS] 0X80 FOOT CAP (9261-071)--------------------------------[1PCS] D7. 40X80 FOOT CAP (9261-072)--------------------------------[1PCS] D8. 95X140L RUBBER PAD(9630-003)-------------------------[2PCS]...
  • Page 5 CBP-300 ASSEMBLY INSTRUCTIONS PARTS ILLUSTRATION SHEET A[1PCS] B[1PCS] C[1PCS] D[1PCS] E[2PCS] 5584-K007 5584-K009 8386-101 40X80X2TX600L 40X80X2TX500L F[1PCS] G[1PCS] H[1PCS] I[1PCS] 8220-148 9111-065 9121-064 8830-017 Ø25.4X73.5L CBP300-032008 Page...
  • Page 6 CBP-300 ASSEMBLY INSTRUCTIONS Above shows STEP 1 assembled and completed CBP300-032008 Page...
  • Page 7 CBP-300 ASSEMBLY INSTRUCTIONS Above shows STEP 1 assembled and completed CBP300-032008 Page...
  • Page 8 CBP-300 ASSEMBLY INSTRUCTIONS Above shows STEP 3 assembled and completed CBP300-032008 Page...