Tensioning The Belt; Profiles - Horizon Fitness Paragon Owner's Manual

D O N O T S T A N D O N T H E B E L T
While you are preparing to use the treadmill, do not stand
on the belt. Place your feet on the side rails before start-
ing the treadmill. Start walking on the belt only after the
belt has begun to move. Never start the treadmill at a fast
running speed and attempt to jump on!
T E N S I O N I N G T H E B E L T
If you can feel a slipping sensation when running on
the treadmill, the running belt must be tightened. In
most cases, the belt has stretched from use, causing the
belt to slip. This is a normal and common adjustment. To
eliminate this slipping, tension both the rear roller bolts
M M
with the 8 Allen wrench, turning it 1/4 TURN to the
right as shown. Try the treadmill again to check for slip-
ping. Repeat if necessary, but NEVER TURN the roller
bolts more than 1/4 turn at a time. The belt tension is set
18
P R O F I L E S
P 1 - M A N U A L
Customized workout, with no default
Time.
P 2 - I N T E R V A L S
Speed changes; Time defaults to 24
minutes
P 3 - R O L L I N G
Speed changes; Time defaults to 48
minutes
P 4 - W E I G H T L O S S
Elevation changes; Time defaults to
48 minutes
P 5 - H I L L W A L K
Elevation and speed changes; no
preset time.
P 6 - H I L L R U N
Elevation and speed changes; no
preset time.
paragon paragon
11