Polycom KWS600v3 Installation And Configuration Manual page 13

Enter the AC code you created earlier in
9.
page 9 and press the check mark ( ).
NOTE: The handset should now be registered, and should display the assigned identity. If it does not
register, wait 10 seconds and then repeat the steps above.
Manually Registering the 5020/5040 Handsets
Insert the battery, plug in the charger, and place the handset in the charger for four hours.
1.
Press the left softkey to turn on the handset.
2.
Press Menu to enter the main menu.
3.
Scroll to Settings and press Select.
4.
Scroll to Advanced and press Select.
5.
Scroll to Login and press Select.
6.
Scroll to Create login and press Select. The handset will begin searching for a system.
7.
Scroll to the found system and press Select.
8.
Enter the AC code you created in
9.
press OK to connect to the system.
Press OK.
10.
NOTE: The handset should now be registered, and should display the assigned identity. If it does not
register, wait 10 seconds and then repeat the steps above.
Programming the Repeaters Using the KIRK
Programming Kit Repeater
NOTE: To program the repeater, you need the programming software (ServiceTool), and the power
supply. The ServiceTool is not part of the Programming Kit Repeater, but can be downloaded from
www.polycom.com. The power supply for the repeater is to be ordered separately (UK version part
number: 84642421; EU version part number: 84642420; US version part number: 84642432).
Setting Up the Hardware for Programming the Repeater
Unplug the repeater power supply and insert the splitter. Connect the repeater power supply to the
1.
splitter and the mains.
NOTE: Ensure that you have the appropriate power supply for the local requirements.
Connect the serial cable to the splitter and com port of your computer. The repeater is now ready
2.
for programming via the ServiceTool.
NOTE: The above mentioned order of the setup (Steps 1 and 2) is important.
Configuring the DECT System on the KWS600v3 on
Configuring the DECT System on the KWS600v3 on page 9
13
and