Smeg Hob Instructions For The User page 23

Burner
Auxiliary (1)
Semi rapid (2)
Reduced rapid (3)
Wok (4)
Wok double control (5)
8.4 Primary air adjustment
Refers to distance "X" in mm.
BURNER
Auxiliary (1)
Semi rapid (2)
Reduced rapid (3)
Wok (4)
Wok double control (5)
To identify the burners on your hob, refer to the drawings in "8.6 Arrangement of the burners on the
cooking hob".
8.5 Final operations
After making the adjustments described above, reassemble the appliance by
following the instructions in "8.1 Removing the hob top" in reverse order.
8.5.1 Adjusting the minimum setting for city and natural gas
Reposition the components on the burner and slide the
knobs onto the tap rods.
Light the burner and set it on the minimum position.
Extract the knob again and turn the adjustment screw
inside or next to the tap rod (depending on the model)
until the correct minimum flame is achieved.
Refit the knob and verify that the burner flame is stable
(when turning the knob rapidly from the maximum to the
minimum position the flame must not go out).
Instructions for the installer
Consumption (MJ/h)
Internal
External
NG – 1.0 kPa
Nominal gas
4.8
6.1
9.5
14.0
4.8
12.2
ULPG
2.75 kPa
10.0
10.0
10.0
12.0
Internal
External 13.0
Injector
(mm)
0.98
1.10
1.35
1.65
0.98
1.55
Natural Gas
1.0 kPa
2.0
6.0
6.0
5.0
8.0 3.0
3.0
25