Use only the USB 3.0 Y-cable that came with the SSD18C3 to connect it to a computer,
•
and always ensure that the cable you are using is in good condition. NEVER use a cable
that is frayed or damaged.
Ensure nothing is resting on the USB cable and that the cable is not located where it can
•
be tripped over or stepped on.
Reminders
Always follow the procedures in the "Disconnecting from a Computer" section to remove the
SSD18C3 from your computer.
Both ends of the USB 3.0 Y-cable should be
connected to provide ample power to the
SSD18C3
4