Table of Contents
Advertisement
Safety Precautions
These usage and safety guidelines are IMPORTANT! Please follow them carefully.
General Use
Carefully unpack the contents of the SSD18C3 package.
•
During operation, avoid exposing your SSD18C3 to extreme temperatures above 70℃,
•
or below 0℃.
Do not drop your SSD18C3.
•
Do not allow your SSD18C3 to come in contact with water or any other liquids.
•
Do not use a damp/wet cloth to wipe or clean the exterior case.
•
o Do not store your SSD18C3 in any of the following environments: Direct
sunlight
o Next to an air conditioner, electric heater or other heat sources
o In a closed car that is in direct sunlight
o In an area with strong magnetic fields or excessive vibration
If your Windows computer will not boot while the SSD18C3 is connected, please
•
disconnect the SSD18C3 to your computer first and connect the SSD18C3 after starting
Windows. Otherwise, refer to your computer's manual and change the BIOS settings to
instruct the computer to boot from a different device.
Backing up Data
Transcend does NOT take any responsibility for data loss, or damage during
•
operation. If you decide to store data on your SSD18C3 we strongly advise that you
regularly backup the data to a computer, or other storage medium.
To ensure Super-Speed USB 3.0 data transfer rates when using your SSD18C3, please
•
make sure that your computer has the relevant drivers and hardware to support USB 3.0.
If you are unsure about how to check this, please consult the user's manual of your
computer, motherboard, or USB 3.0 interface card for USB 3.0 driver information.
Transporting
Do not pack the SSD18C3 into luggage without proper padded support. Other items in
•
your luggage may damage the SSD during travel if it does not have proper protection.
Avoid squeezing or compressing the SSD18C3.
•
Do not place objects on top of your SSD18C3.
•
Power
The SSD18C3 gets its power directly from your computer's USB port. However, the
•
power supplied by the USB ports on some older computers does not meet the stable 5V
DC power requirements of the SSD18C3. If your SSD18C3 does not function properly
upon connecting it to your computer, please plug BOTH ENDS of the USB 3.0 Y-cable
into your computer.
3
Advertisement
Table of Contents
