Reminders - Transcend StoreJet 25H3 User Manual

Use only the USB 3.0 cable that came with the StoreJet 25 to connect it to a computer,
and always ensure that the cable you are using is in good condition. NEVER use a cable
that is frayed or damaged.
Ensure nothing is resting on the USB cable and that the cable is not located where it can
be tripped over or stepped on.

Reminders

Always follow the procedures in the "Disconnecting from a Computer" section to remove the
StoreJet from your computer.
Both ends of the USB 3.0 Y-cable should be
connected to provide ample power to the
SH25H3
5