(6b) power source ! remove battery from charger after charging period SKIL can assure flawless functioning of the tool only has ended thereby lengthening the service life of when original accessories are used the battery...
When turning in a screw at/near the cross cut end or an secteur edge of wood one should pre-drill a hole in order to SKIL ne peut se porter garant du bon fonctionnement de avoid cracking of the wood cet outil que s’il a été utilisé avec les accessoires For an optimal use of the tool a steady pressure on the d’origine...
Page 6
EN 60 335, EN 55 014, EN 50 260, v súlade s predpismi 73/23/EEC, 89/336/EEC, 98/37/EEC. HLUKU/VIBRÁCIÁCH Merané pod¬a EN 50 260 je úroveµ akustického tlaku tohto nástroja < 70 dB(A) a vibrácie sú < 2,5 m/s (metóda ruka - paΩa). SKIL Europe B.V. J. P. Houben...