Prevent unintentional starting. Ensure the switch is F Auxiliary handle in the off-position before connecting to power G Green charging light (2597) source and/or battery pack, picking up or carrying H Red charging light (2597) the tool. Carrying power tools with your fi nger on the switch or energising power tools that have the switch on invites accidents.
Page 8
Shorting the battery terminals together may cause • SKIL can assure fl awless functioning of the tool only burns or a fi re. when original accessories are used d) Under abusive conditions, liquid may be ejected •...
- always use auxiliary handle F 2 (can be adjusted - if red light H starts blinking, this indicates that the as illustrated) battery should be cleaned or replaced (2597) - keep the ventilation slots uncovered - while charging, the charger and the battery may - do not apply too much pressure on the tool;...
- send the tool or charger undismantled together with avertissements et instructions peut entraîner un choc proof of purchase to your dealer or the nearest SKIL électrique, un incendie et/ou de graves blessures sur les personnes. Conservez tous les avertissements et service station (addresses as well as the service toutes les instructions pour pouvoir s’y reporter...
Page 11
RUIDOS/VIBRACIONES Medido según EN 60 745 el nivel de la presión acústica de esta herramienta se eleva a 71 (2497)/ 72 (2597) dB(A) y el nivel de la potencia acústica 82 (2497)/83 (2597) dB(A) (desviación estándar: 3 dB), y la vibración a ✱ m/s (método brazo-mano).
Page 12
Θ ΡYΒ /ΚΡΑ∆ΑΣΜ YΣ Μετρηµένη σύµ ωνα µε EN 60 745 η στάθµη ακ υστικής πίεσης αυτ ύ τ υ εργαλεί υ ανέρ εται σε 71 (2497)/72 (2597) dB(A) και η στάθµη η ητικής ισ ύoς σε 82 (2497)/83 (2597) dB(A) (κ ινή απ κλιση: 3 dB), και...
Page 13
ZGOMOT/VIBRAØII Måsurat în conformitate cu EN 60 745 nivelul de presiune a sunetului generat de acest instrument este de 71 (2497)/72 (2597) dB(A) iar nivelul de putere a sunetului 82 (2497)/83 (2597) dB(A) (abaterea standard: 3 dB), iar nivelul vibraøiilor ✱...
Page 14
✱ 2497 2597 2,4 m/s 2,7 m/s 7,7 m/s 7,9 m/s 1,5 m/s 1,5 m/s When drilling in metal When impact drilling in concrete Uncertainty (K) Pendant le perçage du métal Pendant le perçage de percussion du béton Incertitude (K)
Need help?
Do you have a question about the 2597 and is the answer not in the manual?
Questions and answers