Thermador PALPKITHC Instructions Manual page 10

Setting valve screws on
PRO-HARMONY™ Dual-Fuel Ranges
-and- Pro Cooktops:
• Remove knob from the valve stem by slowly pulling
knob straight out, away from control panel.
• Remove the bezel-mounting screw located to the right
of the valve stem, using a T-20 Torx driver.
English 8
• To engage the valve screw, insert the precision
screwdriver with 1/8" blade into the hole in the bezel
created by removal of the mounting screw.
• Turn the valve screw clockwise just until "bottom out"
position is reached. DO NOT over-tighten the valve
screw.
NOTE:
• It is necessary that the two valves for XLO operation
(farthest left on control panel) are in the OFF position
for proper access to the valve screws through
clearance holes in the XLO potentiometers.