Replacing Fuse - Yamaha F50C Owner's Manual

Outboard motor f50c; t50c; f60c; t60c
Table of Contents

Advertisement

q
w
6) Turn off the engine and wait 3 min-
utes. Recheck the oil level using the
dipstick to be sure the level falls
between the upper and lower marks.
Fill with oil if it is below the lower
mark, or drain to the specified level if
it is above the upper mark.
7) Dispose of used oil according to local
regulations.
201012
NOTE:
8 For disposal of used oil consult your
Yamaha dealer.
8 The oil should be changed more often
when the engine is operated under
adverse conditions such as extended
trolling.
EMU01329*

REPLACING FUSE

If the fuse has blown on an Electric start
model, open the fuse holder and replace
the fuse with a new one of proper amper-
age.
w
Be sure to use the specified fuse. An
incorrect fuse or a piece of wire may
allow excessive current flow. This could
cause electrical system damage and a fire
hazard.
NOTE:
If the new fuse blows again immediately,
e
consult a Yamaha dealer.
1 Fuse holder
2 Fuse (20A)
000539
3 Spare fuse (20A)
4-19
E

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F60cT50cT60c

Table of Contents