Changing Gear Oil - Yamaha F50C Owner's Manual

Outboard motor f50c; t50c; f60c; t60c
Table of Contents

Advertisement

EMU01460

CHANGING GEAR OIL

w
8 Be sure the outboard is securely fas-
tened to the transom or a stable stand.
You could be severely injured if the out-
board falls on you.
8 Never get under the lower unit while it
is tilted, even when the tilt-support
lever/knob is locked. Severe injury
could occur if the outboard accidentally
falls.
1) Tilt the outboard motor so that the oil
w
2) Place a suitable container under the
q
3) Remove the oil drain plug 1.
000565
NOTE:
The oil drain plug is magnetic. Remove all
metal particles from the plug before rein-
stalling it.
4) Remove the oil level plug 2 to allow
cC
Inspect the used oil after it has been
drained. If the oil is milky, water is get-
ting into the gear-case which can cause
gear damage. Consult a Yamaha dealer
for repair of the lower unit seals.
NOTE:
For disposal of used oil consult your
Yamaha dealer.
4-24
drain plug is at the lowest point possi-
ble.
gear-case.
the oil to drain completely.
E

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F60cT50cT60c

Table of Contents