Treatment Of Submerged Motor - Yamaha F50C Owner's Manual

Outboard motor f50c; t50c; f60c; t60c
Table of Contents

Advertisement

EMU00446
TREATMENT OF SUBMERGED
MOTOR
If the outboard motor is submerged,
immediately take it a Yamaha dealer. Oth-
erwise, some corrosion may begin almost
immediately.
If you cannot immediately take the out-
board motor to a Yamaha dealer, follow
000526
the procedure bellow for taking care to
minimize engine damage.
EMU00448
1) Thoroughly wash away mud, salt,
seaweed, etc. with fresh water.
2) Remove the spark plug(s), then face
the spark plug holes downward to
allow any water, mud or contami-
nants to drain.
3) Drain the fuel from the carburetor,
fuel filter and fuel line. Drain the
000549
engine oil completely.
4) Fill the sump with the fresh engine oil
as the same quantity as the engine oil
capacity.
Engine oil capacity:
Refer to SPECIFICATIONS, Page 4-1.
5) Feed engine fogging oil or engine oil
through the carburetor(s) and spark
plug
engine with the manual starter or
000299
emergency starter rope.
6) Take the outboard motor to a Yamaha
dealer as soon as possible.
cC
Do not attempt to run the motor until it
has been completely inspected.
5-8
hole(s)
while
cranking
E
the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F60cT50cT60c

Table of Contents