Ups Settings; Wake-Up On Lan (Wol) - Thecus N4100PRO User Manual

If a corrupt print job is sent to a printer, printing may suddenly fail. If your print
jobs seem to be locked up, pressing the Remove All Documents button to clear
the print queue may resolve the issue.
For information on how to set up the Printer Server, refer to Chapter 5:
Additional Feature Setup >

UPS Settings

The N4100PRO can also support various
uninterruptible power supply units through
USB interface, providing extra data security
and accessibility in the case of a power
failure.
From the Status menu, choose the UPS
item and the UPS Setting screen appears.
Make any changes you wish, and press
Apply to confirm changes. See the
following table for a detailed description of
each item.
UPS Settings
Item
UPS Monitoring
Manufacturer
Battery Status
Power
Seconds between power failure and
first notification
Seconds between subsequent power
failure notifications
Shutdown the system when the
battery charge is less than
Apply
For tested of supported UPS, the '*' sign has lead on front of model name.

Wake-Up On Lan (WOL)

The N4100PRO has the ability to be
awoken from sleep mode via WAN port.
From the Status menu, choose the
WOL item, and the Wake-up On Lan
Configuration screen appears. From
here, you can Enable or Disable.
Printer Server.
Description
Enable or disable UPS monitoring.
Choose the UPS manufacturer and model number
from the dropdowns.
Current status of the UPS battery
Current status of the power being supplied to the
UPS
Delay between power failure and first notification
in seconds.
Delay between subsequent notifications in
seconds.
Amount of UPS battery remaining before system
should auto-shutdown.
Press Apply to save your changes.
23