Step 3: Create Local Users Or Setup Authentication; Step 4: Create Folders And Set Up Acls; Step 5: Start Services - Thecus N4100PRO User Manual

Step 3: Create Local Users or Setup Authentication

Once the RAID is ready, you can begin to create local users for the N4100PRO, or
choose to setup authentication protocols such as Active Directory (AD).
For more on managing users, go to Chapter 4: System Management > User
and Group Management.
For more information on configuring Active Directory, see Chapter 4: System
Management > User and Group Management > ADS/NT Configuration.
For information about the benefits of Active Directory, see Appendix D: Active
Directory Basics.

Step 4: Create Folders and Set Up ACLs

Once users are introduced into your network, you can begin to create various
folders on the N4100PRO and control user access to each using Folder Access
Control Lists.
More information on managing folders, see Chapter 4: System Management >
Folder Management.
To find out about configuring Folder Access Control Lists, see Chapter 4: System
Management > Folder Management > Folder Access Control List (ACL).

Step 5: Start Services

Finally, you can start to setup the different services of the N4100PRO for the
users on your network. You can find out more about each of these services by
clicking below:
SMB/CIFS
Apple File Protocol (AFP)
Network File System (NFS)
File Transfer Protocol (FTP)
iTunes Server
Media Server
Download Manager
Printer Server
18