Siemens IL TELEFONO ALESSI User Manual page 21

Always check the settings of the room monitor before you leave
W
home, e.g. sensitivity and phone line.
The room monitor function severely curtails the handset's operating time.
If necessary you should place the handset which is near the baby in the
i
charger to ensure that the battery does not run down.
The room monitor function can also be used in Walk and Talk mode.
Activating the room monitor function and entering the 'call to' number for
the first time
Step 1: Open the input field:
Step 2: Activate room monitor:
Step 3: Enter the destination number:
Enter internal number: INT
Enter external number:
Step 4: Set the sensitivity: if necessary press
The room monitor function is now activated.
Once the room monitor is activated, switch directly to the room monitor setting with
(open menu).
Deactivating the room monitor
You can deactivate the room monitor remotely (depending on the base). Take the call
from the room monitor and press
around 90 seconds after the call ends. The room monitor will make no further calls. The
other room monitor functions on the handset (e.g. no ringer) will remain activated until
you press the display key
To reactivate the room monitor function with the same telephone
i
number, you must turn on the activation again and save with
v s
;
Add. Features
r
(in the Room M.: line, select On);
s
s
(select handset)
~
à
; (open menu);
O R
. The room monitor function will deactivate
on the handset that is in the baby's room.
Off
Using several handsets
;
OK
Room Monitor
(to the next line);
Edit
; or:
OK
Save Entry
s
(to the next line);
OK
;
;
;
OK
r
; .
Save
v
.
Save
19