Setting The Walk And Talk Mode - Siemens IL TELEFONO ALESSI User Manual

Using several handsets

Setting the Walk and Talk mode

The Walk and Talk function allows two handsets (maximum range 300 metres) to call
each other no matter how far they are from the base.
Precondition:
Both handsets have been registered to the same base (recommended for the room
N
monitor function) or
Both handsets are registered to different bases and both are set to Best Base
N
(page 8) or
One of the handsets is not registered to any base and the registered handset is set
N
to Best Base or
Neither handset is registered to a base.
N
In Walk and Talk mode the handsets cannot be reached by incoming calls. The handset
operating times are greatly curtailed.
Activating/deactivating the Walk and Talk mode
v
(open menu);
To deactivate: press the display key
c
Press (Talk key) or
and Talk mode. Ring and advisory tones are set in exactly the same way as if your
handsets were in range of the base (page 21).
The ringer (page 22) and keypad lock (page 8) can be activated/deactivated in the Walk
and Talk mode.
To open the menu, press the display key ©.
The Walk and Talk mode is retained even when you switch your handset
i
off and back on.
Using a handset in Walk and Talk mode as a room monitor
à
(open menu);
s
(to the next line); select
The room monitor will only call handsets that are in the Walk and Talk mode.
Always check the settings of the room monitor before you leave
W
home, e.g. sensitivity and phone line. The distance between the
handsets should not now be changed (range).
Press the display key
The handset returns to the normal Walk and Talk mode.
20
s
OK
Add. Features
Off
d
(handsfree key). The call will go to all handsets that are in Walk
s
Room Monitor
r
(Low or High);
on the room monitor handset to deactivate the room monitor.
Off
s
;
Walk and Talk
.
s
; (to the next line); select
OK
.
Save
OK
.
r
(On);