Maktec MT064 Instruction Manual
  1. Manuals
  2. Brands
  3. Maktec Manuals
  4. Drill
  5. MT064
  6. Instruction manual

Maktec MT064 Instruction Manual

Hide thumbs Also See for MT064:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual, User Manual
INSTRUCTION MANUAL
Cordless Driver Drill
MT064
MT065
003947
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MT064 and is the answer not in the manual?

Questions and answers

Related Manuals for Maktec MT064

Summary of Contents for Maktec MT064

  • Page 1 INSTRUCTION MANUAL Cordless Driver Drill MT064 MT065 003947 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    ENGLISH SPECIFICATIONS Model MT064 MT065 Steel 10 mm 13 mm Wood 25 mm 28 mm Capacities Wood screw 6 x 75 mm 6 x 75 mm Machine screw 6 mm 6 mm High 0 - 1,300 0 - 1,300 No load speed (min...

  • Page 3: Important Safety Instructions For Charger

    SAVE THESE INSTRUCTIONS. that is damaged should be carefully checked to determine that it will operate properly and perform ENC001-3 its intended function. Check for alignment of IMPORTANT SAFETY moving parts, free running of moving parts, INSTRUCTIONS FOR CHARGER breakage of parts, mounting and any other conditions that may affect its operation.

  • Page 4: Functional Description

    out with clear water and seek medical be collected separately and returned to attention right away. It may result in loss of environmentally compatible your eyesight. recycling facility. ADDITIONAL SAFETY RULES FUNCTIONAL DESCRIPTION FOR CHARGER & BATTERY CAUTION: CARTRIDGE Always be sure that the tool is switched off and the •...
  • Page 5 To start the tool, simply pull the switch trigger. Tool may be damaged. speed is increased by increasing pressure on the switch Do not use the speed change lever while the tool is • trigger. Release the switch trigger to stop. running.

  • Page 6: Screwdriving Operation

    clockwise to tighten the chuck. Drilling in metal To remove the bit, hold the ring and turn the sleeve To prevent the bit from slipping when starting a hole, counterclockwise. make an indentation with a center-punch and hammer at the point to be drilled. Place the point of the bit in the OPERATION indentation and start drilling.
  • Page 8 Makita Corporation 884489-971...

This manual is also suitable for:

Mt065

Table of Contents