The Back Panel - TP-Link TD-W8151N User Manual

TD-W8151N
please refer to Note
configuration. You may need to check this part of information with your ISP and make sure
everything have been input correctly. Refer to
information.

2.2 The Back Panel

 POWER: The Power plug is where you will connect the power adapter.
ON/OFF: The switch for the Router.

 WPS: This button is for WPS settings. For details, please refer to
 RESET: There are two ways to reset the Router's factory defaults.
Method one: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from "Maintenance-SysRestart" of the Router's
Web-based Utility.
 WiFi: Press this button to enable or disable Wireless LAN interface.
 LAN: Through the port, you can connect the Router to your PC or the other Ethernet network
devices.
 ADSL: Through the port, you can connect the Router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to
Router".
150Mbps Wireless N ADSL2+ Modem Router User Guide
1. If your ADSL LED is GREEN ON, please check your Internet
Figure 2-2
5
4.1.1 Device Info and
4.3.3.1 WPS Settings
"2.4 Connecting the Modem
4.3.1 Internet for more