Resetting The Handset To Factory Default; Registering At More Than One Base Station; Changing The Base Station - Gigaset 3015 Classic Operating Instructions Manual

Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19
Press keys:
Telephone PIN
e. g.

Resetting the handset to factory default

This setting does not alter the telephone PIN.
Base station registrations are maintained.
Mobile unit factory settings:
Speed dial numbers, redial, hot key
Handset volume, ringer tone
Ringer volume
Automatic talk, key beep, battery warning
beep, confirmation beep
Base station display
Initiate the setting.
Enter the telephone PIN and confirm
(factory setting 0000).
Reset settings to factory default and terminate the function.
Registering at more than one base
station
You can operate your mobile unit at up to 4 base stations.
For information on registration at Gigaset 3015 see page 49

Changing the base station

Prerequisite: the mobile unit is registered at several base stations.
You can choose one of the following:
Set the mobile unit to select automatically the best base (factory
setting).
Set the mobile unit to priority base station – the mobile unit
searches for other base stations if this is not found within 30 sec-
onds.
Set the mobile unit to a fixed base station.
Press the set key followed by the INT key.
For example, set Base 1 as the priority base.
For automatic selection: enter
For priority base: enter the base number twice.
For fixed base: enter the base number once.
Save the setting and terminate the function.
MOBILT.FM
Individual mobile unit settings
deleted
1
5
on
off
.
20.12.99
39