Table of Contents
Advertisement
Installation
Camera Installation
1. Aim the LG logo of the Dome Camera to face the place that you wish to
watch.
2. Tighten the M4 Tapping Screws to fix the Dome Camera on the ceiling,
then adjust the Pan (Left / Right) by moving the Pan Base. Tighten the
M4 Tapping Screws after adjustment.
3. Loosen the Tilting Lock Screw. Adjust the Tilt (Up/ Down) by moving the
Tilt Base then tighten Tilting Lock Screw.
4. Loosen the Focus Lock Screw. Adjust the Focus by moving the Focus
Lens then tighten Focus Lock Screw.
5. Install the Dome Cover to the main body by turning it counterclockwise
to the end.
Notes:
•
When you install the camera, handle with care. The camera could be dam-
aged by improper handling or storage.
•
If this camera is mounted on the other places except ceiling, you need an
extra bracket for mounting. (not supplied)
•
When installing the camera with 3.0mm fixed lens, You must note that a black
image on the coner can be made, depending on the angle of the camera.
8
Hole for Fixing
I
C
C
In
Advertisement
Table of Contents
