Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not intended. Disconnect power. Unplug charger when not in use. SKU 37412 37412.p65 Specifications s t t °...
Page 3
20. Never operate without all guards in place. Do not disable blade guard when cutting. 21. Guard against kickback. Kickback occurs when the saw stalls and is driven backwards toward the operator. When this happens, release switch immediately.
When unpacking, check to make sure the following parts are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. If any part of the machine is missing or broken, please call Harbor Freight Tools at the number on the front cover as soon as possible.
Installing Cutting Blade Remove battery. Press on the stop button (#17) located on top of the saw to keep the saw blade from moving while turning the nut bolt. Using the hex key (#48), loosen and remove nut bolt (#1) and washer (#2).
Page 6
Nut Bold (#1) Washer (#2) Prepare Material Before Cutting Support large panels to minimize risk of blade pinching and saw kickback. Use a rip fence or secured straight edge guide when ripping material. Securely clamp material to be cut to work bench.
Page 7
Secure rip fence or straight edge to the material to guide the saw on a straight path. Place the saw base (#50) on material to be cut. Align the front notch (right edge aligns with saw blade) on the cut line.
Page 8
SKU 37412 37412.p65 Page 8 t l o n i t 10/7/03, 11:56 AM...