Specifications; General Safety Rules; Work Area - Chicago Electric 92623 Assembly And Operating Instructions Manual

Item
Power Requirement
Speed
Disc Size
Spindle Size
Line Cord
Weight
Accessories
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious injury.
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.
SKU 92623

SPECIFICATIONS

Description
120 VAC, 10 amps (input), 60 Hz
200 to 3377 RPM; Variable
7 inches
5/8 inches – 11 TPI
6 feet; Two-prong polarized plug
6.6 lbs.
2 – Sanding Disks: 60 and 240 grit
1 – Foam Pad
1 – Terry Towel
1 – Polishing Bonnet
1 – Polishing Pad
SAVE THIS MANUAL

GENERAL SAFETY RULES

WARNING!
SAVE THESE INSTRUCTION

Work Area

For technical questions, please call 1-800-444-3353
E194601
English
Page 2