Filling The Salt Dispenser - Siemens Dishwasher Instructions For Use Manual
Hide thumbs
Also See for Dishwasher:
- Instructions for use manual (40 pages) ,
- Operating instructions manual (40 pages) ,
- Instructions for use manual (34 pages)
Table of Contents
Advertisement
en
Filling the salt dispenser
Function of the salt
The salt removes the hardness-causing
constituents from the tap water.
Undo the screw cap on the
dispenser
.
27
Before switching on the appliance for
the first time, pour approx. 1 litre /
3
1
/
pt of water into the salt dispenser.
4
Add salt until the salt dispenser is full
(max. 1.5 kg / 3.3 lb). The water or salt
solution is displaced by the salt and
overflows.
The salt dispenser should always be
refilled immediately before washing.
This ensures that the overflowing salt
solution is immediately washed out and
does not remain on the floor of the
appliance interior.
Then remove salt residue from
the filling area and screw down the
dispenser without jamming the
screw cap.
6
Note
If the switch is set to ”0”, it is not
necessary to add any salt, as
none is consumed while the
dishwasher is operating. If the
switch is set between ”1” and ”3”,
then salt must be added.
Do not pour detergent into the
container for special salt. This
would destroy the water
softener.
LOW SALT indicator
Salt should be added as soon as the
coloured dot in the lid on the salt container
is no longer visible.
27
Page 6
Hide quick links:
Advertisement
Table of Contents
