Delivery according to the installation and Immediately check the packaging and assembly instructions. dishwasher for any damage which may The dishwasher must NOT be have been caused in transit. Do not use connected to the power supply during a damaged appliance, but consult your installation.
The When disposing of old appliance could tip forward. appliances The water inside the dishwasher is not suitable for drinking. Appliances that have reached the end Do not use solvents of any kind inside of their service life should be rendered your dishwasher.
Getting to know your Operating principle, display with buttons dishwasher Diagrams of the control panel and the Auto Wash interior of the appliance can be found Options Start in the envelope at the front. Individual positions are referred to in the text.
Before using your appliance Providing operating materials for the first time To operate the dishwasher you will require salt (only for appropriate water Before you can use your appliance for the hardness, see chapter “Adjusting first time, you must select the language.
Use the enclosed salt filler. The calcareous solution is pumped out of Refill with salt (do not use edible salt) the dishwasher. The softening system is until the salt dispenser is full (max. 1.5 kg). then reset to standby. When the salt dispenser is being refilled, This regeneration sequence does not water is displaced and drains away.
Find out the degree of hardness of your In order to provide satisfactory rinsing tap water. Your water supply company results, the dishwasher requires soft water, or customer service will assist you. i.e., containing little or no lime, otherwise water stains will be left behind on the Switch on the appliance with the main dishes and interior containers.
Filling with rinse aid Rinse aid is used in washing mode to ensure that glasses are sparkling and utensils are stain-free. When the appliance is switched on, low rinse aid level is indicated by ”Refill rinse aid”. You can add rinse aid either when the appliance door is completely open or –...
To prevent damage, take glass and cycle. Even some types of glass (e.g. cutlery out of the dishwasher as soon crystal glass objects) may become cloudy as possible after the programme has after many rinse cycles. Completely ended.
Scrape off any large amounts of left-over food. It is not necessary to rinse the dishes under running water. Place objects in the dishwasher in such a way that items such as cups, glasses, pots/pans, etc. are stood upside down,...
Spray head for baking sheets * Shelf * * on applicable models * not on all models Please refer to the drawings enclosed in Lean tall glasses and those with long the envelope stems against the shelf – not against other Large baking sheets or grids can be items to be washed.
Top basket with upper and lower roller pairs Pull out the top basket. Remove the top basket and re-attach it to the upper or lower rollers. To raise the basket, take hold of the basket on the upper edge and pull upwards.
”combined cleaning products” which eliminate the need for a rinsing agent or Nowadays there are three types of salt, for example: dishwasher detergent available: 1. Those containing phosphates Some products with a built-in rinsing and chlorine. agent are only used to their full effect in 2.
Detergent dispenser with dosing aid The graduated detergent dispenser helps you add the correct amount of detergent. The lower and middle lines in the dispenser indicate15 ml and 25 ml of detergent respectively. The dispenser can be filled with 40 ml of detergent when the door is opened horizontally.
Opening and closing Reduce costs! the door If your dishes are only To open the door, pull the door handle. moderately dirty, you may be To close the door, press the door shut able to use less detergent than until it “clicks” into position. recommended.
Adjusting the appliance Selecting a programme The following programmes can be Switching on the appliance selected in turn from the “Auto Wash” programme in the main menu: Turn on the tap fully. Switch on the appliance with the main Auto Super Wash – Auto Wash – Auto Delicate Wash –...
Programme overview Type of utensil e.g. porcelain, Hard- pans, Mixed Fragile Mixed wearing cutlery, glasses, etc. Type of food Coffee, Soups, Soups, Rinse if the remains cake, milk, potatoes, soufflés, utensils have e.g. sausage, cold pastries, sauces, been left for drinks, rice, eggs, potatoes,...
Programme data Selecting options/ standard settings The programme data (duration, energy and water consumption) can be found in Operating principle the summary of instructions and refers to standard conditions. Greater deviations may be caused by: Auto Wash different quantities of utensils Options Start inlet temperature of the water...
(reduced value) or water stains (increased value) on the utensils. If you do not want to use Reduce time the next time you use the dishwasher, You can select a value between 0 you must switch off the option again.
Language Standard programmes Before using the appliance for the first In addition to the wash programmes which time, you can change the selected can be selected from the main menu, the language (see chapter “Before using the following standard programmes can be appliance for the first time”).
Starting the programme Interrupting the programme Before starting the appliance, check To interrupt the programme, open again that the spray arms can rotate the door. Open the door only slightly freely. to prevent water from spraying out of the appliance. In the main menu press the “Start”...
Terminating the programme End of programme As soon as the programme has ended, Open the door. Open the door only slightly to prevent water from spraying the buzzer is emitted 5 times. out of the appliance. Open the door. “Finished” is briefly “Terminate programme”...
You can help prevent faults by checking and maintaining your appliance regularly. This will save time and reduce problems. Therefore you should occasionally examine the inside of your dishwasher. Overall condition of the appliance Check the rinsing compartment for grease and limescale deposits.
Fault finding Some time after the programme has started, a continuous buzzer Resolving minor problems is emitted. yourself The appliance is not being filled with water. When the appliance door is Experience has shown that you can opened, “Check water supply!” is resolve most problems that arise during indicated.
... with the appliance itself ... during washing Lower spray arm rotates with Unusual amount of foam is created difficulty Normal washing up liquid has Spray arm is blocked by small been poured into the rinse-aid items or food remains. container.
Remnants of food are stuck to the Selected programme did not dishes, cutlery, etc. include drying function. Dishwasher was not loaded Amount of rinse-aid was set too properly. Jets of water could not low. reach all parts of the dishes, etc.
Customer Service Notes Please call your local service agent, if you Disposal of your old appliance are not able to resolve any problem Old appliances are not worthless rubbish. yourself. The name of your nearest service Valuable raw materials can be reclaimed agent is shown in the Customer Service by recycling old appliances.
General Installation Built-under and integrated appliances The dishwasher must be connected by which are subsequently installed as a qualified technician to ensure correct free-standing appliances must be operation. The specifications for supply, secured to prevent them from falling drainage and connected load must fulfil over, e.g.
Transportation Water pressure: Minimum 0,5 bar – maximum 10 bar. Empty the dishwasher according to If the water pressure is higher, install a the following steps: pressure reducing valve. Turn on the tap.
You should only turn off the tap if you are absent from home for a prolonged period, e.g. on holiday for several weeks. Family Line 01805–2223 Siemens–Hausgeräte EUR 0,12/Min. DTAG 5 600 054 012 en (8301) Besuchen Sie uns im Internet: http://www.siemens.de/hausgeraete...