Maintenance and care
You can help prevent faults by checking
and maintaining your appliance regularly.
This will save time and reduce problems.
Therefore you should occasionally
examine the inside of your dishwasher.
Overall condition of the
Check the rinsing compartment for grease
and limescale deposits.
If you find any deposits:
Fill the detergent dispenser with
detergent. Start the empty appliance
with the programme which has the
highest rinsing temperature.
Clean the door seal:
Wipe the door seal regularly with
a damp cloth and remove any deposits.
Check the LOW SALT indicator
up with salt, if required.
Check the level of liquid in the rinse-aid
. Top up with rinse-aid, if
keep large foreign objects
in the rinsing water away from the pump.
These foreign objects may occasionally
block the filters.
After each washing cycle check the
filters for residue.
Unscrew the filter cylinder and remove
the filters. The filters are permanently
attached to each other and cannot be
Remove large foreign objects. Clean
the filters under running water.
Insert the filters and screw the filter