During normal use During installation Use the dishwasher solely in a Site the dishwasher and connect it up in domestic environment and for its accordance with the installation designated purpose: washing instructions. household tableware and other utensils.
Illustrations of the control panel and the by a qualified specialist. interior of the dishwasher are shown on The dishwasher must be disconnected the rear fold-out cover of this manual. Fold from the electricity supply before any this page out before you read the manual.
2. Switch on the appliance, holding down the main switch until the display is lit. 3. Select the language and acknowledge. Providing operating materials To operate the dishwasher you will require salt (only for appropriate water hardness, see chapter “Adjusting the softening system”), rinse aid, detergent.
Add salt until the salt dispenser is full The calcareous solution is pumped out of (max. 1.5 kg). When you add salt, water the dishwasher. The softening system is is displaced and runs away. Salt should then reset to standby.
In order to provide satisfactory rinsing Switch on the appliance with the main results, the dishwasher requires soft water, switch . The main menu is i.e., containing little or no lime, otherwise water stains will be left behind on the displayed (if switching on the appliance dishes and interior containers.
As long as the rinse-aid refill indicator on Close the lid, ensuring that you hear it the panel or dispenser has not snap closed. illuminated, there is sufficient rinse-aid in the dishwasher. Important Use only rinse-aids intended LOW RINSE-AID indicator for use in domestic dishwashers.
To prevent damage, take glass and glasses, etc., aluminium and silver items cutlery out of the dishwasher as soon tend to become discoloured or faded if as possible after the programme has washed in the dishwasher. Some types of ended.
Scrape off any large amounts of left-over food. It is not necessary to rinse the dishes under running water. Place objects in the dishwasher in such a way that items such as cups, glasses, pots/pans, etc. are stood upside down,...
Spray head for baking sheets * Shelf * * on applicable models * not on all models Please refer to the drawings enclosed in Lean tall glasses and those with long the envelope stems against the shelf – not against other Large baking sheets or grids can be items to be washed.
If required, the height of the top basket can To raise the basket, take hold of the be adjusted in order to create more space basket on the upper edge and pull for large utensils either in the top or bottom upwards.
”combined cleaning products” which eliminate the need for a rinsing agent or Nowadays there are three types of salt, for example: dishwasher detergent available: 1. Those containing phosphates Some products with a built-in rinsing and chlorine. agent are only used to their full effect in 2.
Opening and closing Adjusting the appliance the door Switching on the appliance To open the door, pull the door handle. Turn on the tap fully. To close the door, press the door shut Switch on the appliance with the main until it “clicks”...
Programme overview Type of utensil e.g. porcelain, Hard- pans, Mixed Fragile Mixed wearing cutlery, glasses, etc. Type of food Coffee, Soups, Soups, Rinse if the remains cake, milk, potatoes, soufflés, utensils have e.g. sausage, cold pastries, sauces, been left for drinks, rice, eggs, potatoes,...
Programme data Selecting options/ standard settings The programme data (duration, energy and water consumption) can be found in Operating principle the summary of instructions and refers to standard conditions. Greater deviations may be caused by: Auto Wash different quantities of utensils Options Start inlet temperature of the water...
“Reduce time: Off” (factory setting) is displayed. Select “Reduce time: On”. Return to the main menu and start the selected programme. If you do not want to use Reduce time the next time you use the dishwasher, you must switch off the option again.
Language Standard programmes Before using the appliance for the first In addition to the wash programmes which time, you can change the selected can be selected from the main menu, the language (see chapter “Before using the following standard programmes can be appliance for the first time”).
Starting the programme Interrupting the programme Before starting the appliance, check To interrupt the programme, open again that the spray arms can rotate the door. Open the door only slightly freely. to prevent water from spraying out of the appliance. In the main menu press the “Start”...
Terminating the programme End of programme As soon as the programme has ended, Open the door. Open the door only slightly to prevent water from spraying the buzzer is emitted 5 times. out of the appliance. Open the door. “Finished” is briefly “Terminate programme”...
Information about programme sequence When the appliance has started, the following displays are indicated. Recalculating time remaining The expected programme duration is recalculated depending on the amount and Recalculating time degree of soiling of the dishes. Finished in x.xx hours Displays the remaining running time of the programme.
Information about programme sequence Wash The dishes are optimally washed with detergent and heated water. Wash Rinsing with rinse-aid To prevent water marks on the dishes, rinse-aid is automatically added. Rinse Drying The dishes are now dried. Drying The programme has ended. The dishes can now be removed.
Check that no grease or scale has accumulated on the inside of the dishwasher. If you discover any deposits: Clean the interior of the dishwasher thoroughly with a detergent solution. Special Salt When the salt level is low, your dishwasher displays a message in the window.
Spray arms Fault finding Lime and remnants of food in the washing Resolving minor problems water can block the nozzles in the spray yourself arms and the arm mountings . Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without Inspect the nozzles in the spray arms having to call out a service engineer.
Some time after the programme Lid in detergent compartment has started, a continuous buzzer cannot be closed is emitted. Detergent compartment has been overfilled. The appliance is not being filled with water. When the appliance door is Mechanism is clogged with opened, “Check water supply!”...
Remnants of food are stuck to the Items were removed from dishes, cutlery, etc. dishwasher too soon. Dishwasher was not loaded Glasses have a dull appearance properly. Jets of water could not Amount of rinse-aid was set too reach all parts of the dishes, etc.
Customer Service Other information Please call your local service agent, if you Notes on waste disposal are not able to resolve any problem Old appliances still have some residual yourself. The name of your nearest service value. An environment-friendly method of agent is shown in the Customer Service disposal will ensure that valuable raw address list.
Fresh-water connection Transportation Connect the inlet hose to a water tap using Empty the dishwasher according to the enclosed parts and in accordance with the following steps: the installation instructions. Turn on the tap. Water pressure: Switch on the appliance.
You should only turn off the tap if you are absent from home for a prolonged period, e.g. on holiday for several weeks. Besuchen Sie uns im Internet: 5 600 043 313 en (8104) http://www.siemens.de/hausgeraete 635D Se...