Use Eap Plug-Ins; Session Initiation Protocol (Sip) Settings; Edit Sip Profiles; Edit Sip Proxy Servers - Nokia E71 User Manual

Use EAP plug-ins

To use an EAP plug-in when you connect to a WLAN
using the access point, select the desired plug-in and
Options > Enable. The EAP plug-ins enabled for use
with this access point have a check mark next to them.
To not use a plug-in, select
To edit the EAP plug-in settings, select
Edit.
To change the priority of the EAP plug-in settings, select
Options Raise priority
>
in before other plug-ins when connecting to the
network with the access point, or
priority to use this plug-in for network authentication
after attempting to use other plug-ins.
See the device help for more information on EAP
plugins.
Session initiation protocol
(SIP) settings
Select Menu Tools
>
SIP settings.
Session initiation protocols (SIP) are used for creating,
modifying, and terminating certain types of
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings
for these sessions. The SIP profile used by default for a
communication session is underlined.
132
Options > Disable.
Options
to attempt to use the plug-
Options Lower
>
Settings Connection
> >
To create a SIP profile, select
profile Use default profile
>
profile.
To select the SIP profile you want to use by default for
communication sessions, select
profile.
>

Edit SIP profiles

Select Options
Profile name
•
Service profile
•
Default access point
•
use for the internet connection.
Public user name
•
from your service provider.
Use compression
•
Registration
•
Use security
•
used.
Proxy server
•
this SIP profile.
>
Registrar server
•
settings for this SIP profile.

Edit SIP proxy servers

Select Options
server.
Proxy servers are intermediate servers between a
browsing service and its users used by some service
providers. These servers may provide additional
security and speed up access to the service.
Options
>
or Use existing
Options
> Edit, and select from the following:
— Enter a name for the SIP profile.
— Select IETF or Nokia
— Select the access point to
— Enter your user name received
— Select if compression is used.
— Select the registration mode.
— Select if security negotiation is
— Enter the proxy server settings for
— Enter the registration server
New SIP profile or Edit
>
New SIP
Default
>
3GPP.
Proxy
>