Eap Plug-Ins; Use Eap Plug-Ins; Session Initiation Protocol (Sip) Settings; Edit Sip Profiles - Nokia E71 User Manual

The EAP (extensible authentication protocol) plug-ins are
used in wireless networks to authenticate wireless devices
and authentication servers, and the different EAP plug-ins
make possible the use of various EAP methods (network
service).
You can view the EAP plug-ins currently installed in your
device (network service).

EAP plug-ins

1. To define the EAP plug-in settings, select
access point and define an access point that uses WLAN
as a data bearer.
2. Select 802.1x or WPA/WPA2
3. Select WLAN security settings
EAP plug-in settings.

Use EAP plug-ins

To use an EAP plug-in when you connect to a WLAN using the
access point, select the desired plug-in and
Enable. The EAP plug-ins enabled for use with this access
point have a check mark next to them. To not use a plug-in,
select Options > Disable.
To edit the EAP plug-in settings, select
To change the priority of the EAP plug-in settings, select
Options Raise priority
>
before other plug-ins when connecting to the network with
the access point, or Options
plug-in for network authentication after attempting to use
other plug-ins.
© 2008 Nokia. All rights reserved.
Options
as the security mode.
WPA/WPA2
>
Options
Options > Edit.
to attempt to use the plug-in
Lower priority to use this
>
See the device help for more information on EAP plugins.
Session initiation protocol (SIP)
settings
Select Menu
settings.
Session initiation protocols (SIP) are used for creating,
modifying, and terminating certain types of communication
New
>
sessions with one or more participants (network service).
Typical communication sessions are video sharing and net
calls. SIP profiles include settings for these sessions. The SIP
profile used by default for a communication session is
EAP
underlined.
> >
To create a SIP profile, select
Use default profile
To select the SIP profile you want to use by default for
communication sessions, select
>

Edit SIP profiles

Select Options
Profile name
•
Service profile
•
Default access point
•
the internet connection.
Public user name
•
your service provider.
Tools Settings
> > >
Options
or Use existing profile.
Options
> Edit, and select from the following:
— Enter a name for the SIP profile.
— Select IETF or Nokia
— Select the access point to use for
— Enter your user name received from
Settings
Connection SIP
>
New SIP profile
> >
Default profile.
>
3GPP.
131