Aes/Ebu And Spdif In/Out; To Configure The Source Of The Digital Output - Tascam TM-D1000 Tutorial

Digital mixer

Hide thumbs Also See for TM-D1000:

Operational manaual (2 pages)

Operation manual (37 pages)

Table Of Contents

Table of Contents

The TM-D1000 comes with two stereo digital outputs and one stereo digital input available on AES/EBU

and SPDIF. These are assignable to different locations on the board, allowing you to keep more signals

in the digital domain.

First of all, it is important to realize that you cannot use both the AES/EBU and SPDIF of a single input or

output at the same time. However, Digital Output A can operate with AES/EBU signal while Digital

Output B is operated with SPDIF signal.

For convenience,

there are two LED

indicators located

just above the

master fader.

They will light to

let you know if

one of the digital

outputs is

configured with

AES/EBU signal.

The digital output

can be assigned

to the buss/aux

sends or to the L/R output. The digital input can be assigned to any channel, the EFFECT RETURN or

the AUX INPUT.

User Tip: If you are assigning the digital input to a pair of channels from 1-8, you can also assign the

analog channel inputs to the aux return. For example, if you are routing a keyboard with a digital output

to channels 7-8 through the digital input, the analog inputs on channels 7-8 aren't going to be used. It is

possible to assign those analog inputs to the AUX INPUT. This really comes in handy if you want to use

external effects with analog connections and you don't have any more channels available.

To configure the source of the digital output:

1) Press SHIFT and PARAM SEL simultaneously.

1/99