Storing/Recalling Snapshots - Tascam TM-D1000 Tutorial

Section XI, Continued
STEP VI - Storing/Recalling Snapshots
Now that you've slaved over your mix, you can save your mixer settings in a "snapshot." This way, you
can set up a mix, save it, set up another mix, save it, and recall either at any time. To do this:
Storing snapshots
- Exit the effects screen if you are in one. (Otherwise, you will be storing effects, not snapshots.)
- Press SHIFT and STORE together. The screen will show the first unwritten snapshot.
- Press ENTER. The screen will now allow you to name the scene.
- Rotate the DATA ENTRY dial to select a character. To switch between upper and lower case letters,
press SHIFT. To get to another space, simultaneously press down and rotate the DATA ENTRY dial.
When you're done naming your snapshot...
- Press ENTER. The screen will now allow you to set the transition time between scenes. Rotate the
DATA ENTRY dial to determine the transition time.
- Press ENTER.
Recalling snapshots
- Exit the effects screen if you are in one. (Otherwise, you will be recalling effects, not snapshots.)
- Press ESCAPE/RECALL.
- Rotate the DATA ENTRY dial to select the desired scene.
- Press ENTER to load that snapshot.
That's it!
Well, that's about it. You just walked through most of the major recording functions of the TM-D1000.
We still encourage you to read the other parts of this guide to help you understand these features in
more detail and to learn about some of the more advanced features.
1/99 Section XI, page 4 TASCAM TM-D1000 Tutorial