Getting Started; Installing The Battery; Electromagnetic Interference Filters (For Thr-4 Only) - Nokia THR880 User Manual

2. Getting started

Installing the battery

1. To open the battery cover, press the release
button upwards, away from the bottom
connectors. Note that pressing the release
button down makes the opening harder.
2. Slide the battery under the radio's back cover
so that the end with the golden contacts
enters first.
3. To close the battery cover, first pull it
back and downwards so that the locking
catches near the hinge are directed
towards their slots, and press them to
make sure that they are locked in place
(1). Then press the bottom end of the
cover down to lock the cover in place (2).
Note: Be careful when closing the
battery cover. If the cover is not properly
closed or, for example, the locking
catches or the seals are damaged, it
impairs the radio's durability against
shocks and water.
If you need to remove the battery, first make sure that the radio is dry
and switched off. Then open the battery cover and pull the battery out.
Electromagnetic interference filters (for THR-4
only)
To check the type number of your radio, remove the battery. The type
number (THR-4 or THR-5) is printed on the white label inside your radio.
When charging a THR-4 radio with the charger ACP-8, ACP-9 or ACP-
12, you need to use two electromagnetic interference filters. Two filters
are supplied in the sales package, and they are also available as separate
accessories.
G e t t i n g s t a r t e d
Copyright © 2004 Nokia. All rights reserved. 25