Scanning The Groups On A Channel; Receiving A Direct Mode Call; Responding To A Direct Mode Call; Voice Override - Nokia THR880 User Manual

Scanning the groups on a channel

Direct mode scanning allows you to receive calls made to the other
groups on the same channel. Press
mode settings and Direct mode scanning
You can also activate and deactivate direct mode scanning in the fast
menu. Press and select Scanning on
holding . See also Fast menu on page 31.

Receiving a direct mode call

You can receive calls from the selected group and the scanned groups in
the selected channel. Even if scanning is not on, you can receive calls
from groups that are on the same frequency and that have been defined
as open groups (network service).
When you receive a direct mode call,
name and the name of the channel and group are displayed. If the
speaker's number or name is not available,
If the connection to the transmitting radio is lost, the note
lost is displayed.

Responding to a direct mode call

Press and hold the PTT key while the channel's and group's names are
displayed.
You can queue for your turn to talk during a call by pressing and holding
the PTT key. A queuing tone is played while you are in the queue. You
can start speaking after a short tone is played and
display. You can stop queuing by releasing the PTT key.

Voice override

With voice override (network service), you can override the
communication in the group and avoid the need to queue for your turn
to speak. If you have a right to use voice override, the text above
Override when the radio receives a direct mode call.
D i r e c t m o d e
Menu and select Settings, Direct
and select On or Off.
or Scanning off by pressing and
and the speaker's number or
Call is displayed.
Connection
appears on the
Copyright © 2004 Nokia. All rights reserved.
is
51