Advertisement
Installation Guide: Nokia 7210 MIDP SDK 1.0
16-12-02
6 GETTING STARTED
The MIDP SDK needs to be configured before the use. When integrated with JBuilder & MobileSet, the MIDP
SDK is configured as follows:
Select Configure JDKs from JBuilder 's Tools menu.
-
Change the current JDK's home path or add a new JDK.
-
The default JDK home path is
...\Nokia\Devices\Nokia_7210_MIDP_SDK_v1_0
If necessary, change the name of the JDK (e.g. into "7210 MIDP JDK").
-
Check that your current project is using this new JDK: Select Project Properties from JBuilder's Project
-
menu.
Select Tools | Nokia Developer's Suite for J2ME
-
emulator from the 'Select SDK/Emulator' pull-down menu
("Nokia 7210 MIDP SDK 1.0"). Finally, press the Ok button.
Now your MIDP SDK is ready for application development. For more information, see the user's guides for your
IDE and Nokia Developer's Suite for J2ME
7 TROUBLESHOOTING
If the following error message appears at the beginning of the installation, please check that your Java Runtime
TM
Environment (JRE
) is properly installed and set. Java 2 SDK (including JRE) can be downloaded from Sun
website.
Figure 2. Installation error message.
Copyright © 2002 Nokia Corporation. All rights reserved.
TM
| Configure Emulator... and select the newly installed
TM
and Forum Nokia website
6
www.forum.nokia.com
.
Advertisement
