Panasonic SC-PM22 Operating Instructions Manual page 8

A
B
Transmission window
C
RQT5243
Insert the batteries observing the
correct polarities ( , ).
R6, AA, UM-3
Remote control signal
sensor
About 7 meters in front
of the signal sensor
30˚ 30˚
OPEN/CLOSE
Do not mix old and new batteries, or batteries of different types
(manganese and alkaline, etc.).
Never subject batteries to excessive heat or flame; do not attempt
to disassemble them; and be sure they are not short-circuited.
If the remote control is not to be used for a long period of time, re-
move the batteries and store them in a cool, dark place.
Do not attempt to recharge alkaline or manganese batteries.
Do not use rechargeable type batteries.
Do not place obstacles between the remote control signal sensor
and remote control unit.
Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
Take care to keep the remote control signal sensor and end of the
remote control unit free from dust.
If this system is installed in a rack with glass doors, the glass doors'
thickness or color might make it necessary to use the remote con-
trol a shorter distance from the system.
Do not place heavy items on the remote control.
Do not disassemble or reconstruct.
Do not spill water or other liquids on the remote control.
When the unit is turned on, the glide panel retracts automatically ena-
bling access to the operation buttons.
When the unit is turned off, the glide panel closes automatically.
To open/close the glide panel manually
Press [OPEN/CLOSE] when the unit is on.
When the glide panel is closed manually, the display light dims.