Sony WEGA KE-50XBR900 Operating Instructions Manual page 29
Hide thumbs
Also See for WEGA KE-50XBR900:
- Service manual (203 pages) ,
- Specifications (2 pages) ,
- Dimension manual (1 page)
Table of Contents
Advertisement
Connect
the CATV cable to the cable box's
input jack.
Use the supplied
antenna cable to connect the cable box's output jack to
the TV's VHF/UHF
jack.
Run the Auto Setup program,
as described
in "Setting
Up the Channel
List" on page 49.
CATV
Antenna cable
cable
(supplied)
VHF/UHF
,.I- -looT
}
/
Use the cable box
Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then
use the cable box to switch channels.
Set up the TV remote control to
Program the remote control. See "Programming
the Remote Control" on page 54.
operate the cable box
Activate the remote control to
Press
,_ (;
repeatedly until the
indicator lights up.
operate the cable box
Prevent the accidental switching
When using the cable box, you need the TV to stay on the channel the cable box is
of TV channels
set to (usually channel 3 or 4). You can use the TV's Channel Fix feature to lock in a
specific channel. For details, see "Using the Channel Menu" on page 84.
Do not leave the display indication of the cable box turned on.
Advertisement
Table of Contents
