Media Receiver Unit Front Panel - Sony WEGA KE-50XBR900 Operating Instructions Manual

Media receiver unit
Front Panel
mlB
[]
Press to turn on and off the main power of the TV Set.
Lights up in green when the TV set is turned on. The LED
lights up in red when in standby mode. The LED does not
light up when the main power is turned off. If the LED
blinks continuously, this may indicate the Media receiver
unit needs servicing (see "Contacting Sony" on page 96).
When lit, indicates one of the timers is set. When the timer
is set, this LED will remain lit even if the TV set is turned
off. For details, see page 89.
Memory Stick insertion slot. For details, see "Inserting and
Removing a Memory Stick" on page 70.
.... When lit, indicates that the Memory Stick is being read.
(Do not remove the Memory Stick when the indicator is lit.)
' Press repeatedly to cycle through the video equipment
connected to the Media receiver unit's video inputs.
Press repeatedly to cycle through the Multi-channel TV
Sound (MTS) options: Stereo, Auto SAR and Mono. For
details on each option, see page 80.
......... ;can q uickly i r;ug ................
channels, press and hold down either (:; }: .....
Press to adjust the volume.
:'::::: ::;/ Connects to the composite A/V output jacks on your
i camcorder or other video equipment.
) Connects to the S VIDEO OUT jack on your camcorder or
other video equipment that has S VIDEO. Provides better
picture quality than composite video ().
..... ii?,'