Video - Sony WEGA KE-50XBR900 Operating Instructions Manual

Video
No picture (screen not lit), no If your TV does not turn on, and a red light keeps flashing, your TV may need
sound service. Call your local Sony Service Center.
Make sure the power cord is plugged in.
Press on the front of the media receiver unit.
Press to cycle through the connected video sources.
Try another channel; it could be station trouble.
Press so that the PICUTRE OFF LED on the display unit goes off.
Make sure the display interface cable is connected to the display unit and media
receiver unit.
poor o rnop-ict ........................................ .......................................
(screen lit), good sound ;il Adjust the option in the Video Menu (see page 78).
Check the antenna!cable connections.
No color
Only snow and noise appear on ;ii Check the antenna/cable connections.
the screen ;iX Try another channel; it could be station trouble.
Press ? to change the input mode (see page 52).
Dotted lines or stripes Adjust the antenna.
Move the TV away from noise sources such as cars, neon signs, or hair-dryers.
oui;i imagesor gi osis ..................
"Black box" on screen ;iX You have selected a text option in the Setup Menu and no text is available. (See
page 90 to reset Setup selections.) To turn off this feature, set the
option to If you were trying to select closed captioning, select i;i; instead of
Black bands appear at the top Some wide-screen programs are filmed in aspect ratios that are greater than 16:9
and bottom of the screen (this is especially common with theatrical releases). Your TV will show these
programs with black bands at the top and bottom of the screen. For more details,
check the documentation that came with your DVD (or contact your program
provider).
Certain programs on DVD or ;ii The compression used by certain digital broadcasts and DVDs may cause your
other digital sources display a TV's screen to display less detail than usual, or cause artifacts (small blocks or
loss of detail, especially during dots, pixelations) to appear on your screen. This is due to your TV's large screen
fast-motion or dark scenes and ability to show very fine detail, and is normal for certain digitally recorded
programs. Adjust the reality/clarity in the DRC Palette menu (see page 79) to
optimize the picture while viewing these sources.