General - Sony WEGA KE-50XBR900 Operating Instructions Manual

General
How to reset TV to Turn off the main power of the TV set. While holding down on the
factory settings remote control, turn on the main power of the TV set. Turn on the TV. While
holding down on the remote control, press on the media
receiver unit. (The TV will turn itself off, then back on again.) Release
How to restore Video settings Press on the remote control while in the Video Menu (see page 78).
to factory settings
How to restore Audio settings Press on the remote control while in the Audio Menu (see page 80).
to factory settings
annotcycieth_;ou ghitieoti_e esureii_ opt i onisn otsetto i: (seepage9i_i ..................................
video equipment connected to
the TV
Cannot operate Menu If a menu option appears in gray, this indicates that the menu option is not
available.
Lost password !!! in ihe password screen (see page 8;i, en;r ;i_e
?oil owing master p as;worii ;
.....
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
LED on the display unit is lit ;il The POWER ON/STAND BY LED (see page 16) lights up when the TV is turned
on. If the LED blinks continuously, this may indicate the TV needs a service.
, The TIMER LED (see page 16) indicates that the timer is set. When the timer is
set, this LED will remain lit even when the TV is turned off.